Solution for not working MTP Mode on Redmi 4X

[Guide] How to fix MTP mode on Redmi 4X

In case MTP mode isn’t working on your Redmi 4X device, and your PC can’t find your device when it’s connected via USB cable, then you might want to try this simple solution. This was tested on MULTIROM firmware, but will probably work on other versions as well.

Solution for not working MTP Mode on Redmi 4X

Open “system/build.prop” and add these lines in the bottom of the file.

persist.service.adb.enable=1
persist.sys.usb.config=mtp,adb

Save and confirm changes.

That’s it! MTP mode should now work perfectly fine!

Here you can find more detailed guide (it’s written for Redmi 4 Prime, but works pretty much the same way): Fix MTP mode on Redmi 4 Prime

Download MTP Fix for 8.2.5.0 and 8.2.10.0 ROM versions

Below you can also download and try the following patches for Official MIUI Global ROMS 8.2.5.0 and 8.2.10.0. Install via TWRP. This patch will only fix MTP on your phone.