Android 8 - Xiaomi Firmware https://xiaomifirmware.com/tag/android-8/ MIUI Android Devices Tips & Guides Sun, 09 May 2021 17:37:28 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.5 https://xiaomifirmware.com/wp-content/uploads/2016/09/cropped-Untitled-design-32x32.png Android 8 - Xiaomi Firmware https://xiaomifirmware.com/tag/android-8/ 32 32 Download Official MIUI ROMs for Xiaomi Redmi 6A https://xiaomifirmware.com/roms/download-official-miui-roms-for-xiaomi-redmi-6a/ https://xiaomifirmware.com/roms/download-official-miui-roms-for-xiaomi-redmi-6a/#comments Sun, 11 Nov 2018 14:20:03 +0000 https://xiaomifirmware.com/?p=10594 Xiaomi Redmi 6A was released in 2018, it uses the PowerVR GE8320 graphics and MediaTek Helio A22 processor. In a nutshell, this is a fresh model and good device for it’s price. If it’s happen to be an owner, then you might be looking for the latest firmware version? Check out below and find the full list of all official MIUI ROMs available for download. In the end of this article you’ll also find a method on how to unbrick your Redmi […]

The post Download Official MIUI ROMs for Xiaomi Redmi 6A appeared first on Xiaomi Firmware.

]]> Xiaomi Redmi 6A was released in 2018, it uses the PowerVR GE8320 graphics and MediaTek Helio A22 processor. In a nutshell, this is a fresh model and good device for it’s price. If it’s happen to be an owner, then you might be looking for the latest firmware version? Check out below and find the full list of all official MIUI ROMs available for download. In the end of this article you’ll also find a method on how to unbrick your Redmi 6A after installing the wrong ROM.

Latest MIUI Firmware for Redmi 6A (CACTUS)

Before you’ll start downloading and flashing ROMs on your device, make sure that you’ve all required drivers installed on your PC:

Download TWRP 3.2.3 for Xiaomi Redmi 6A

And if you require TWRP Custom Recovery you can find one here as well. This recovery version is build on the Android 8.1 kernel V9.6.6.0.OCBCNFD. Pay attention that if you flash the following custom recovery and allow system partition modifications you must install ROOT on your device, otherwise it simply won’t boot. To enable root use the Magisk app.

Global Stable MIUI ROM for Redmi 6A (Cactus)

Now after the short introduction, let’s get straight to the firmware:

Global Developer MIUI ROM for Redmi 6A (Cactus)

Russian Stable MIUI ROM for Redmi 6A (Cactus)

China Stable MIUI ROM for Redmi 6A (Cactus)

China Developer MIUI ROM for Redmi 6A (Cactus)

Stable ROM: Stable version which is released each 1-2 months.

Developer ROM: Beta version of the official MIUI ROM, these ROM usually receive the new features and and bug fixes, can be used as everyday ROMs. Released each week.

Recovery: Installed via TWRP, stock recovery or MiPCSuite software.

Fastboot: Installed via MiFlash or fastboot.exe .bat scripts.

How to unbrick Redmi 6A?

Here’s a much required tutorial on how to restore hardbricked Redmi 6A, if “the system has been destroyed”. Please pay attention that you are responsible for any possible issues with your device if you decide to follow the method described below. In case your device can’t boot into recovery at all, then this instruction might not work for you.

  1. Download MiFlashPro.
  2. Download the latest firmware version for Recovery.
  3. Turn on “Power” and “Volume Up” buttons on your device to reboot into Recovery.
  4. Select “Connect with MiAssistant”.
  5. Connect your smartphone to PC via USB cable.
  6. Open MiFlashPro and select “Recovery”, then locate your device and select the previously downloaded ROM.
  7. Press “Flash”.
  8. Wait until installation process is fully finished and if everything was done correctly, your phone should reboot and work.

That’s pretty much everything we wanted to talk about in this post. Have a great week guys and share your thought about Redmi 6A device in the comments below. Good luck!

Download Modem Files for Redmi 6A

Updating the post with a huge list of modem files from different firmware versions. To see what version works best for you, you have to manually check and test by yourself. China modems working on Global ROM.

MIUI Global Firmware Redmi 6A Modem Files

MIUI China Firmware Redmi 6A Modem Files

Installation is very easy. Boot into TWRP and install without wipes. Then reboot back into the system and check if modem works fine. Change the version if you still experience any issues.

The post Download Official MIUI ROMs for Xiaomi Redmi 6A appeared first on Xiaomi Firmware.

]]> https://xiaomifirmware.com/roms/download-official-miui-roms-for-xiaomi-redmi-6a/feed/ 7 Download Custom ROMs for Redmi Note 5 Global / China https://xiaomifirmware.com/roms/download-custom-roms-for-redmi-note-5-global-china/ https://xiaomifirmware.com/roms/download-custom-roms-for-redmi-note-5-global-china/#respond Sun, 29 Jul 2018 21:57:18 +0000 https://xiaomifirmware.com/?p=9502 In this post we’ll list all currently released custom roms (both Android 7 and latest Android 8 Oreo) for Redmi Note 5 Global / China versions (HMN5P / whyred). Besides download links we’ll include tutorials on how to backup, install TWRP and flash any custom ROM version on your smartphone. Let’s get started. Android 7 & 8 Custom Firmware for Redmi Note 5 (whyred) LineageOS [N] (14.1) for Redmi Note 5 Android 7.x / Developer by: vasishath, shahan_mik3 / XDA Thread / […]

The post Download Custom ROMs for Redmi Note 5 Global / China appeared first on Xiaomi Firmware.

]]> In this post we’ll list all currently released custom roms (both Android 7 and latest Android 8 Oreo) for Redmi Note 5 Global / China versions (HMN5P / whyred). Besides download links we’ll include tutorials on how to backup, install TWRP and flash any custom ROM version on your smartphone. Let’s get started.

Android 7 & 8 Custom Firmware for Redmi Note 5 (whyred)

LineageOS [N] (14.1) for Redmi Note 5

Android 7.x / Developer by: vasishath, shahan_mik3 / XDA Thread / Android Filehost

AospExtended [AEX] 5.6 STABLE (O) for Redmi Note 5

Android 8.x.x / Developer by: AEX official team / XDA Thread / Android Filehost

AOSIP Official for Redmi Note 5

Android 8.x.x / Developer by: akhilnarang / XDA Thread / Download

Bootleggers ROM OFFICIAL for Redmi Note 5

Android 8.x.x / Developer by: taranhora, Keerten, Thanks To #TeamWhyred, Shekhawat & Mdeejay / XDA Thread / Download

DroidOnTimeOS [DotOS] 2.3 STABLE for Redmi Note 5

Android 8.x.x / Developer by: Simrat singh / XDA Thread / Download

Pixel Experience OFFICIAL ROM for Redmi Note 5

Android 8.x.x / Developer by: jhenrique09 / XDA Thread / Download

POSP OFFICIAL for Redmi Note 5

Android 8.x.x / Developer by: devansh21 / XDA Thread / Download

Cardinal-AOSP for Redmi Note 5

Android 8.x.x / Developer by: Rajahmundry / XDA Thread / Download

CypherOS 6.0.0 Unofficial for Redmi Note 5

Android 8.x.x / Developer by: MIguelNdeCarvalho / XDA Thread / Download

Liquid Remix Unofficial for Redmi Note 5

Android 8.x.x / Developer by: AnkitGourav / XDA Thread / Download

AICP 8.1 ROM for Redmi Note 5

Quality ROM from the old and well-known team of developers. This ROM definitely have it’s own unique style and features. There are a lot of additional settings, it’s translated to many different languages.

Android 8.x.x / Developer by: Shahan_mik3, vasishath / XDA Thread / Download

MoKee Oreo 8.1 ROM for Redmi Note 5

Firmware from the old famous team, is based on Los. The first assembly. For downloading, disable ad blockers. Gaps, root (preferably Magisk) – separately.

Android Oreo Custom ROM build on LOS by a great team of developers. Gapps and Magisk needs to be downloaded.

Android 8.x.x / Developer by: MoKee Team / Changelog / Download

LineageOS 15.1 8.1 OFFICIAL ROM for Redmi Note 5

Download from official website: https://download.lineageos.org/whyred

LineageOS 15.1 UNOFFICIAL 8.1.0 for RN5P / RN5 China

Android 8.x.x / Developer by: vasishath / XDA Thread / Download

AOKP Unofficial ROM for Redmi Note 5

Android 8.x.x / Developer by: felix-development / XDA Thread / Download

Resurrection Remix ROM for Redmi Note 5

Official | Oreo v6.1.0 | Latest update: 06.07.2018

Download from official source: https://sourceforge.net/projects/resurrectionremix-oreo/files/whyred/

XDA Link: https://forum.xda-developers.com/redmi-note-5-pro/development/ota-resurrection-remix-os-6-0-0-t3777375

How to install Resurrection Remix on Whyred?

  1. You must have TWRP Custom Recovery installed.
  2. Download Gapps (ARM64, 8.1 Nano / Pico for Oreo).
  3. Download Magisk if you need to enable root.
  4. Copy Gapps and downloaded ROM archive to phone memory.
  5. Boot into TWRP and go to Wipe menu.
  6. Select the following partitions: Data, system, cache and Dalvik Cache.
  7. Confirm wipe.
  8. Go back to main menu and tap on “Install”.
  9. Install ROM .zip archive, then .zip with Gapps and Magisk.
  10. Reboot your device.

Additional files and patches for Resurrection Remix:

crDroid Official ROM for Redmi Note 5

Android 8.x.x / Developer by: Ruturaj Kadam / XDA Thread / Download

Nuclea ROM for Redmi Note 5

Android 8.1.0 / Developer by: Simrat singh / XDA Thread / Download

Havoc OS OFFICIAL ROM for Redmi Note 5

Android 8.x.x / Developer by: Ruturaj Kadam / XDA Thread / Download

XenonHD 8.1 UNOFFICIAL for Redmi Note 5

Android 8.1.0 / Developer by: ramesh1686 / XDA Thread / Download

FireHound v4.7 UNOFFICIAL ROM for Whyred

Android 8.1.0 / Developer by: riteshm321 / XDA Thread / Download

Drivers and Tools for Redmi Note 5 (Whyred)

Below we’ve listed all required files if you want to flash custom ROM, backup or restore your Xiaomi MIUI device.

Mi Flash or MIUI ROM Flashing Tool – 2016.08.30.0 | Download

QDLoader HS-USB Driver | 32/64-bit | Download

Platform-tools (adb/fastboot) | r.25.0.4 | Windows | Download

Minimal ADB and Fastboot | 1.4.2 | Download

15 seconds ADB Installer | 1.4.3 | Download

Download TWRP Custom Recovery for Redmi Note 5 (Whyred)

Official TWRP can be downloaded here: https://dl.twrp.me/whyred/

Official Red Wolf Recovery Project (or RWRP) for Whyred can be downloaded here: https://forum.xda-developers.com/redmi-note-5-pro/development/recovery-red-wolf-recovery-project-t3766997

TWRP Dark Recovery project also can be found on XDA: https://forum.xda-developers.com/redmi-note-5-pro/development/recovery-dark-recovery-project-redmi-t3805791

Just in case here’s the link to different firmware versions for Whyred.

How to flash Custom ROM on Xiaomi Redmi Note 5 (Whyred)

Here’s a guide on how you can install custom ROM on Whyred, this exact tutorial works if you’ve got MIUI official ROM on your device and you want to try Lineage or AOSP-based ROMs. Please pay attention that custom ROMs doesn’t have it’s own firmware and because of that it doesn’t make any changes to ARB or modem files. Less chance to get a bricked device.

  1. When you flash Custom ROM all personal data will be deleted, so if you need to save something to save, then use ® Titanium Backup or any other similar app. If you want to do backup in TWRP, make sure you’ve removed all passwords and screen locks.
  2. Download the ROM you want to install, Gapps (according to the Android version you’ll be installing).
  3. Now we’ll boot into TWRP Custom Recovery and make complete wipes of the system (system, data, internal memory, cache’s), after wipe reboot into TWRP and make data format (we’ll do this to decrypt data, because by default it is encrypted), reboot once again. If you’re installing Custom ROM version which is built on LOS, then you don’t need to do data formatting.
  4. After all the actions above we’ll have a completely clear device and now we can proceed with Custom ROM, Gapps installations etc.
  5. First of all you’ll need to install Custom ROM. In the TWRP main menu tap on “Install”, add .zip archive with ROM files, then include root patches and Gapps if necessary. Confirm installation with swipe.
  6. Now we wait 5-10 minutes until the installation is completed. Your device will automatically reboots into new system.

Additional information for LOS based Custom ROMs

In regarding with new Google requests and LineageOS team, the LOS based ROMs can now be installed only on encrypted data partition. If you updating from official MIUI ROM, then simply install LOS based ROM without data partition decryption.

If you already have data partition with decryption, then you can try installing official MIUI ROM on your device or encrypt it in settings if you can, just go to “Settings” > “Security” > “Encrypt data”.

The post Download Custom ROMs for Redmi Note 5 Global / China appeared first on Xiaomi Firmware.

]]> https://xiaomifirmware.com/roms/download-custom-roms-for-redmi-note-5-global-china/feed/ 0 Download Android 8 Oreo Custom ROMs for Redmi 4X https://xiaomifirmware.com/roms/download-android-8-oreo-custom-roms-redmi-4x/ https://xiaomifirmware.com/roms/download-android-8-oreo-custom-roms-redmi-4x/#respond Fri, 26 Jan 2018 23:02:26 +0000 https://xiaomifirmware.com/?p=8087 Hello, everyone! It’s been a while and I’m pretty sure you’re already very excited after reading the post title. Yes, you can now install and try the latest Android 8 on your Redmi 4x. Remember that before installing any of the following ROM version, you must first unlock the bootloader and flash TWRP Custom Recovery on your device. Android 8 Beta ROMs for Xiaomi Redmi 4X (santoni) The latest Android 8 Oreo Custom ROMs for Redmi 4X are still in […]

The post Download Android 8 Oreo Custom ROMs for Redmi 4X appeared first on Xiaomi Firmware.

]]> Hello, everyone! It’s been a while and I’m pretty sure you’re already very excited after reading the post title. Yes, you can now install and try the latest Android 8 on your Redmi 4x. Remember that before installing any of the following ROM version, you must first unlock the bootloader and flash TWRP Custom Recovery on your device.

Android 8 Beta ROMs for Xiaomi Redmi 4X (santoni)

The latest Android 8 Oreo Custom ROMs for Redmi 4X are still in early development stage and have a “Beta” status. You can already use these ROMs as an everyday ROM but should be aware that some random bugs might occur.

NitrogenOS 8.1 Oreo for Redmi 4X

Developed by Nikesh001

Download link | Latest Gapps 8.1

Additionally, you can download and use custom kernel from Gzosp ROM, which is currently the best one for Android Oreo: Espionage_3.18.92_For_Android_O_XR4X.zip

How to install NitrogenOS Oreo?

  1. Download the latest NitrogenOS ROM version for Redmi 4X and Gapps (optionally).
  2. Boot into TWRP Custom Recovery and proceed with required wipes (wipe Data, Cache, System and cache/dalvik partitions).
  3. Go to “Install” menu, locate downloaded ROM and put Gapps in the line as well.
  4. Wait until installation is completed.

In some cases, it’s required to format Data (happens if your device gets encrypted), so it’s recommended to backup personal data (photography, music and contacts) to external SD card.

LineageOS 15.1 Oreo 8.1 for Redmi 4X

Developed by Dreamstar | XDA Thread

Download ROM: Android Filehost

How to install LineageOS 15.1?

TWRP 3.2.x.x is required!

  1. Wipe the following partitions: Data, System, Cache, Dalvik/ART Cache.
  2. Go to install menu and select LineageOS ROM .zip archive. Optionally add Gapps and SuperSU to enable root.
  3. Wait until installation is completed.
  4. Reboot into system.

Ground Zero Roms Project Oreo 8.1 for Redmi 4X

Developed by TeamGhost | Source link

Download ROM: Sourceforge

How to install Ground Zero Roms Project Oreo?

TWRP 3.2.x.x is required!

  1. Wipe the following partitions: Data, System, Cache, Dalvik/ART Cache.
  2. Go to install menu and select Ground Zero Roms Project Oreo 8.1 ROM .zip archive. Optionally add Gapps and SuperSU to enable root.
  3. Wait until installation is completed.
  4. Reboot into system.

AospExtended v5.1 Android 8.1.0 for Redmi 4X

Developed by Sahroni_AL_Dika | Source link

Download ROM: Google Drive

How to install AospExtended v5.1 Android 8?

TWRP 3.2.x.x is required!

  1. Wipe the following partitions: Data, System, Cache, Dalvik/ART Cache.
  2. Go to install menu and select AospExtended ROM .zip archive. Optionally add Gapps and SuperSU to enable root.
  3. Wait until installation is completed.
  4. Reboot into system.

PixelExperience ROM Android 8.1 Oreo for Redmi 4X

Developed by Team GHOST | Source link

Download ROM: Android Filehost

How to install PixelExperience Android Oreo ROM?

TWRP 3.2.x.x is required!

  1. Wipe the following partitions: Data, System, Cache, Dalvik/ART Cache.
  2. Go to install menu and select AospExtended ROM .zip archive. Optionally add SuperSU to enable root (Gapps are included in this ROM by default).
  3. Wait until installation is completed.
  4. Reboot into system.

AospExtended ROM Oreo for Redmi 4X

Developed by Team GHOST | Source link

Download ROM: Sourceforge

Grab the latest version of Gapps here or use the microG apps: microG.zip

Installation process is very simple. Boot into TWRP, make required wipes and install downloaded ROM.

Cardinal-AOSP 8.1 ROM for Redmi 4X

Developed by Team GHOST | Official release | Source link

Download ROM from Google Drive

TWRP 3.2.x.x is recommended for installation.

Download TWRP 3.2.1-1 for Redmi 4X

TWRP 3.2.1-1 download link: Based on MIUI Version | Based on Custom Kernel Version

Use the link above to download the latest version of TWRP Custom Recovery 3.2.1-1 for Redmi 4X (santoni) which is required for flashing different versions of Android 8 Oreo Custom ROMs.

The post Download Android 8 Oreo Custom ROMs for Redmi 4X appeared first on Xiaomi Firmware.

]]> https://xiaomifirmware.com/roms/download-android-8-oreo-custom-roms-redmi-4x/feed/ 0 Unofficial LineageOS 15.1 (Android 8.1) for Xiaomi Mi 5s https://xiaomifirmware.com/roms/unofficial-lineageos-15-1-android-8-1-xiaomi-mi-5s/ https://xiaomifirmware.com/roms/unofficial-lineageos-15-1-android-8-1-xiaomi-mi-5s/#respond Sun, 21 Jan 2018 17:35:55 +0000 https://xiaomifirmware.com/?p=8026 LineageOS is a free aftermarket firmware distribution of Android 8.1 (Oreo). The Android community builds this custom ROM as an Android Open Source Project. Mainly, it is designed to increase the reliability and performance of your Android device. Now, a new release of this ROM is out there for Xiaomi Mi 5s, and here you can find the installation instructions. Note: You can use LineageOS without having a Google application installed on your Xiaomi Mi 5s. Download LineageOS 15.1 Android 8 […]

The post Unofficial LineageOS 15.1 (Android 8.1) for Xiaomi Mi 5s appeared first on Xiaomi Firmware.

]]> LineageOS is a free aftermarket firmware distribution of Android 8.1 (Oreo). The Android community builds this custom ROM as an Android Open Source Project. Mainly, it is designed to increase the reliability and performance of your Android device. Now, a new release of this ROM is out there for Xiaomi Mi 5s, and here you can find the installation instructions.

Note: You can use LineageOS without having a Google application installed on your Xiaomi Mi 5s.

Download LineageOS 15.1 Android 8 ROM for Mi5S (Capricorn)

LineageOS 15.1 Working Features

  • Camera (Videos and Photos)
  • Audio (Record and Playback)
  • Video Playback
  • Bluetooth
  • Sensor
  • Boots
  • GPS
  • Wi-Fi

How to Install LineageOS 15.1

  1. The first step is to Download the latest build. Here is the link https://androidfilehost.com/?w=files&flid=234421
  2. The second step is to Download the newest Gapps. Here is the link http://opengapps.org/
  3. Now, Reboot your device to recovery.
  4. Next, Flash the latest build and Gapps
  5. And finally, Reboot your device.

Help and Tips: In some cases, there is a need to force reboot after the Gapps installation is complete, because the unofficial installer is buggy. You can do this by holding the power button and volume down button at the same time. A couple of users reported issues like “broken buttons backlight.” However, the developers already know about this problem. They announced releasing a fix for that soon.

If your device keeps restarting after you enter your Wi-Fi password, you can do the following steps: Download the latest weekly MIUI Global Beta ROM > Installed through TWRP > Booted to OS > Restart back to recovery > Wipe everything > Install LOS 15.0 + Gapps > Booted to OS > Setup your device.

LineageOS includes various hardware-specific codes, the full source code for LineageOS is available for the public. If you are interested in checking it out, here is the link to the official source code https://github.com/LineageOS

Changelog

This version of LineageOS removes the UI blur overlay and unlocks the GPS. It also does not have the uninitialized PMW mode issue from the previous versions. Button swap and key disabler for dumpling are disabled. Also, the pinner service files are updated.

This version of LineageOS improves the Bluetooth performance of your device. Wi-Fi HIDL version 1.1 is enabled, and a default_normal option is added as well. LineageOS 15.1 fixes the corruption due to double start or stop. It also doesn’t contain the unused configs for Bluetooth from the previous versions. There is an option for enabling hardware keys overlay as well.

How to Report Bugs

If you are experiencing bugs on your Xiaomi Mi 5s, you can use logcat right after the problems has occurred. But, make sure you use logcat before the reboot. A logcat report after the reboot is useless. Also, always provide as much info as possible, the more info you will provide the more likely that the bug will be solved and the solving process will be faster.

Final Words

LineageOS 15.1 is still an unofficial release. So, be aware that it may have a couple of bugs if you are using it as your primary ROM. However, feel free to give it a try and don’t be shy to share your experience in the comment section below.

The post Unofficial LineageOS 15.1 (Android 8.1) for Xiaomi Mi 5s appeared first on Xiaomi Firmware.

]]> https://xiaomifirmware.com/roms/unofficial-lineageos-15-1-android-8-1-xiaomi-mi-5s/feed/ 0 How to root Mi A1 with Android 8.0.0 Oreo https://xiaomifirmware.com/guides-and-tips/root-mi-a1-android-8-oreo/ https://xiaomifirmware.com/guides-and-tips/root-mi-a1-android-8-oreo/#comments Sun, 31 Dec 2017 13:46:50 +0000 https://xiaomifirmware.com/?p=7599 The latest Android 8.0.0 ROM for Xiaomi Mi A1 has been released and now available for download. The thing is that the previous Mi A1 root method won’t work on Android 8. But no need for panic, the new working method is already found. Enable root on Xiaomi Mi A1 Android 8.0.0 ROM Since all of the current versions of TWRP Custom Recovery won’t work on the Android 8.0 ROM, we will root our Mi A1 without Custom Recovery. Basically, […]

The post How to root Mi A1 with Android 8.0.0 Oreo appeared first on Xiaomi Firmware.

]]> The latest Android 8.0.0 ROM for Xiaomi Mi A1 has been released and now available for download. The thing is that the previous Mi A1 root method won’t work on Android 8. But no need for panic, the new working method is already found.

Enable root on Xiaomi Mi A1 Android 8.0.0 ROM

Since all of the current versions of TWRP Custom Recovery won’t work on the Android 8.0 ROM, we will root our Mi A1 without Custom Recovery. Basically, this is just a temporary solution which can be used until TWRP for Android 8 is released, after we will get the working TWRP version, we can use the old rooting method.

  1. Update your phone to Android 8.0.0.
  2. Download modified kernel and copy to phone internal memory: boot.img
  3. Download and install Magisk Manager.
  4. Open Magisk Manager > go to “Install” > “Patch kernel image” > and locate previously copied “boot.img” file on your device.
  5. Kernel image modification process should start.
  6. Now copy patched boot file to PC. By default it would be saved to “/sdcard/MagiskManager/patched_boot.img”.
  7. Start your Mi A1 device in fastboot mode and check the Android 8.0.0 slot by typing the following line in terminal: 
    fastboot getvar current-slot
  8. Now flash the patched boot image to the corresponding Android 8.0 slot by using the following commands: 
    fastboot flash boot_a patched_boot.img
OR
fastboot flash boot_b patched_boot.img
  9. Reboot your phone with the following command: 
    fastboot reboot
  10. Now you’ve enabled root on your Mi A1 with Android 8 ROM.

We’ll update this post as soon as the working version of TWRP Custom Recovery for Android Oreo is released.

How to install TWRP and root Mi A1 with Android 8 Oreo ROM

Pay attention, that there’s a small chance that your device might go bootloop after using the suggested method below, in this case simply flash the stock MIUI kernel on your phone to restore it. If you’ve got this issue, then it means that there’s no working root method for your device yet.

  1. Download TWRP for Xiaomi Mi A1: twrp-tissot-recovery-3.2.1-0.img
  2. Download and copy these files to your mobile phone: Magisk-v15.3.zip and twrp-3.2.1-1-installer-FIXED_By_DroiDMester.zip (download this archive if you want to flash TWRP permanently).
  3. Boot into TWRP by typing the following command and wait until your device boots into TWRP Custom Recovery: 
    fastboot boot twrp-tissot-recovery-3.2.1-0.img
  4. If you want to root your device without flashing TWRP on your phone, then then click on “Install” in TWRP main menu and flash Magisk-v15.3.zip, then reboot into system.
  5. If you need to flash TWRP permanently, then then click on “Install” in TWRP main menu and flash twrp-3.2.1-1-installer-FIXED_By_DroiDMester.zip, then reboot into recovery and install Magisk-v15.3.zip, reboot into system.

The post How to root Mi A1 with Android 8.0.0 Oreo appeared first on Xiaomi Firmware.

]]> https://xiaomifirmware.com/guides-and-tips/root-mi-a1-android-8-oreo/feed/ 20 Download Android 8 Custom ROMs for Xiaomi Mi5 https://xiaomifirmware.com/roms/download-android-8-custom-roms-xiaomi-mi5/ https://xiaomifirmware.com/roms/download-android-8-custom-roms-xiaomi-mi5/#respond Thu, 14 Dec 2017 22:19:27 +0000 https://xiaomifirmware.com/?p=6990 Hello, guys! Here’s the latest update for all Xiaomi Mi5 owners, below you can download custom ROMs build on the Android 8 version. Here’s our previous post, where you can find Android 7 Nougat Custom ROMs for Mi5. Now let’s cover each ROM one by one. Latest Android 8 Oreo ROMs for Xiaomi Mi5 To use any of these ROMs you must have unlocked bootloader and TWRP Custom Recovery installed on your device. Download the latest TWRP for Mi5 here. […]

The post Download Android 8 Custom ROMs for Xiaomi Mi5 appeared first on Xiaomi Firmware.

]]> Hello, guys! Here’s the latest update for all Xiaomi Mi5 owners, below you can download custom ROMs build on the Android 8 version. Here’s our previous post, where you can find Android 7 Nougat Custom ROMs for Mi5.

Now let’s cover each ROM one by one.

Latest Android 8 Oreo ROMs for Xiaomi Mi5

To use any of these ROMs you must have unlocked bootloader and TWRP Custom Recovery installed on your device. Download the latest TWRP for Mi5 here.

AEX.mod Oreo ROM (beta) for Mi5

Developed by DennySPB

How to install?

  1. Download ROM.
  2. Copy to phone and boot into TWRP.
  3. Wipe System, Data, Cache, Dalvik/ART Cache
  4. Install firmware.
  5. Install downloaded ROM.
  6. Optionally install GApps.
  7. Reboot in system.

Download from AndroidFilehost

The Android Open Source Project OREO for Mi5

Developed by JDCTeam | Beta | Android 8.0.0 | Release date:17.11.2017

Not recommended for everyday use!

How to install?

  1. Make Nandroid Backup in TWRP Custom Recovery.
  2. Install required firmware.
  3. If you’re using f2fs you must update TWRP to the latest version.
  4. Wipe Data / Factory reset.
  5. Install ROM archive.
  6. Optionally install GApps. If your phone stuck at “Install completed” message, reboot by pressing “Power” button.
  7. Reboot into system.

Download link | XDA Thread

LineageOS 15.0 ROM for Xiaomi Mi5

Developed by bgcngm

How to install LineageOS 15.0?

  1. Reboot in TWRP Recovery (Download TWRP for Mi5).
  2. Wipe “System”, “Data” and “Cache” partitions.
  3. Install LineageOS .zip archive.
  4. Optionally install SuperSU addon to enable root.
  5. Optionally install Gapps.

XDA Thread

PureFusionOS ROM for Xiaomi Mi 5

Official Beta | Android 8.0.0 | Release date: 05.11.2017

Highly optimized ROM build on AOSP.

How to install PureFusionOS on Mi 5?

  1. Download PureFusionOS ROM.
  2. Backup your current system in TWRP Recovery.
  3. Wipe System, Data, Cache and Dalvik.
  4. Install the PureFusion ROM and Gapps optionally.
  5. Wipe “Cache” after installation.
  6. Reboot into system.

Download ROM | XDA Thread | Google+

The post Download Android 8 Custom ROMs for Xiaomi Mi5 appeared first on Xiaomi Firmware.

]]> https://xiaomifirmware.com/roms/download-android-8-custom-roms-xiaomi-mi5/feed/ 0 How to Install Product Sans Font on MIUI 8/9 https://xiaomifirmware.com/guides-and-tips/install-product-sans-font-miui-8-9/ https://xiaomifirmware.com/guides-and-tips/install-product-sans-font-miui-8-9/#respond Fri, 03 Nov 2017 22:57:40 +0000 https://xiaomifirmware.com/?p=5648 Google’s product sans font made its debut in the Android 8 (Oreo) release. Besides excelling in legibility and scale, the font is simple and beautiful. And we’ve come to appreciate its form and function after seeing it on Google’s branding. The ubiquitous “G” trademark is one such example. Download and install Google Product Sans Font for MIUI Until recently, product sans admirers had only a chance of using it if they owned a Google-phone. But even if you had one, […]

The post How to Install Product Sans Font on MIUI 8/9 appeared first on Xiaomi Firmware.

]]>
Source: Imgur

Google’s product sans font made its debut in the Android 8 (Oreo) release. Besides excelling in legibility and scale, the font is simple and beautiful. And we’ve come to appreciate its form and function after seeing it on Google’s branding. The ubiquitous “G” trademark is one such example.

Download and install Google Product Sans Font for MIUI

Until recently, product sans admirers had only a chance of using it if they owned a Google-phone. But even if you had one, the font doesn’t show in the entire Oreo UI. Pixel 2 devices, for example, use product sans on the lock-screen, settings, and clock apps alone.

Fortunately, modders have found a way of availing product sans to nearly all ROM versions. They extracted the font from Android 8.1 Developer Review and made it usable on firmware, such as:

  • OEM stock ROMs
  • Custom ROMs: AOSP-based ROMs, e.g., LineageOS
  • MIUI ROMs: MIUI Pro, Mi-Globe, Epic ROM, Xiaomi.EU
  • Stock MIUI: Global/beta MIUI 8/9

As the list shows, if you are an MIUI user: you’re in luck. Using the tools and steps that I will share, you’ll finally be able to revamp your phone’s UI with the product sans font.

How to Install Product Sans Font Using TWRP

The process is quite straightforward if you already have TWRP on your phone.

Note: for Redmi 4X and Mi 6 users who haven’t, you can find helpful guides here and here, respectively.

That said; follow these steps to start using product sans font:

  1. Grab zip file and save it in a location that you will recall quickly: MIUI_TWRP_GoogleSans.zip
  2. Restart your phone and start your TWRP
  3. Click Backup > System > Install
  4. Navigate to the zip file that you saved in step #1 and select it
  5. Flash the file then select Reboot

In the unlikely event that the font doesn’t please you, you could always revert to default font settings.

For that, just head back to your TWRP and click “Restore system.”

How to Install Product Sans Font Without TWRP

Messing with your phone’s boot-loader may not be your style. In that case, you can still enjoy product sans by theming. Here’s how:

  1. Grab this mtz theme file and save it to your phone’s internal memory:
  2. Open the Theme Editor app for MIUI. (You can install it from Google Play Store.)
  3. In the Editor, click Themes > Import
  4. Choose Internal Storage > MIUI > Theme. Then select the mtz file that you saved in step #1
  5. On completing that, the editor will add product sans to its font list. So, scroll down and select it. Restart your phone to apply the changes.

Take a few minutes to review how the font looks on your apps. If you don’t like it, head back to the MIUI Theme Editor and re-apply the system font settings. Then restart your phone.

Because of a bug, MIUI may struggle to make product sans bold or italicized as needed. In that event, you have no option but to restart the process the TWRP way (as I’ve shown in the previous section.)

Did the installation work for you? Have you experienced any issues? Let’s discuss in the comments section.

The post How to Install Product Sans Font on MIUI 8/9 appeared first on Xiaomi Firmware.

]]> https://xiaomifirmware.com/guides-and-tips/install-product-sans-font-miui-8-9/feed/ 0 Download Lineage OS 15 for Xiaomi Mi4i https://xiaomifirmware.com/roms/download-lineage-os-15-xiaomi-mi4i/ https://xiaomifirmware.com/roms/download-lineage-os-15-xiaomi-mi4i/#respond Sun, 24 Sep 2017 20:01:47 +0000 https://xiaomifirmware.com/?p=4892 If you wanted to try the latest Android 8 Oreo Custom ROM, here’s your chance to download the LineageOS 15 Custom ROM for Xaomi Mi4i (Ferrari). LineageOS Android 8 Oreo ROM for Xiaomi Mi4i How to install LineageOS 15 Android 8 on Xiaomi Mi4i Download Firmware 8.1.5: firmware-lp-8.1.5.0.zip Download the latest ROM version from here. Download Gapps for Android 8. Reboot into TWRP Custom Recovery. Wipe “Cache”, “Dalvik Cache”, “System” and “Data” partitions. Go to “Mount” folder and remove the checkmark […]

The post Download Lineage OS 15 for Xiaomi Mi4i appeared first on Xiaomi Firmware.

]]> If you wanted to try the latest Android 8 Oreo Custom ROM, here’s your chance to download the LineageOS 15 Custom ROM for Xaomi Mi4i (Ferrari).

LineageOS Android 8 Oreo ROM for Xiaomi Mi4i

How to install LineageOS 15 Android 8 on Xiaomi Mi4i

  1. Download Firmware 8.1.5: firmware-lp-8.1.5.0.zip
  2. Download the latest ROM version from here.
  3. Download Gapps for Android 8.
  4. Reboot into TWRP Custom Recovery.
  5. Wipe “Cache”, “Dalvik Cache”, “System” and “Data” partitions.
  6. Go to “Mount” folder and remove the checkmark against “System” partition.
  7. Next go to “Install zip” and flash the firmware first.
  8. Next install the downloaded ROM.
  9. Proceed to installing Gapps.
  10. And now reboot into system!

Known issues of this version:

  • HotSpot is not working.
  • SeLinux Permissive not working.
  • Probably some issues with MTP.

Download links:

Firmware | Download ROM | Gapps

The post Download Lineage OS 15 for Xiaomi Mi4i appeared first on Xiaomi Firmware.

]]> https://xiaomifirmware.com/roms/download-lineage-os-15-xiaomi-mi4i/feed/ 0 Download Android 8 Custom ROM for Xiaomi Mi3 / Mi4 https://xiaomifirmware.com/roms/download-android-8-custom-rom-xiaomi-mi3-mi4/ https://xiaomifirmware.com/roms/download-android-8-custom-rom-xiaomi-mi3-mi4/#respond Sun, 24 Sep 2017 17:45:26 +0000 https://xiaomifirmware.com/?p=4889 We continue our list of posts regarding the latest Android 8 Oreo Custom ROMs for Xiaomi smartphones. In this exact post you’ll find download links for AOSP and NitrogenOS Android 8 ROMs for Mi3 and Mi4 (pisces, cancro, MI3W, MI3C). We’ll try to update this post as soon as possible and you can also remind us about this in comments below! Latest Android 8 Oreo Custom ROMs for Xiaomi Mi3 and Mi4 Download AOSP Android 8 Oreo for Mi3 / Mi4 Developed by: vasishath […]

The post Download Android 8 Custom ROM for Xiaomi Mi3 / Mi4 appeared first on Xiaomi Firmware.

]]> We continue our list of posts regarding the latest Android 8 Oreo Custom ROMs for Xiaomi smartphones. In this exact post you’ll find download links for AOSP and NitrogenOS Android 8 ROMs for Mi3 and Mi4 (pisces, cancro, MI3W, MI3C). We’ll try to update this post as soon as possible and you can also remind us about this in comments below!

Latest Android 8 Oreo Custom ROMs for Xiaomi Mi3 and Mi4

Download AOSP Android 8 Oreo for Mi3 / Mi4

Developed by: vasishath | Release: 22.09.2017 | Android 8.x Oreo

Download | XDA Thread

Download Nitrogen OS N Android 8 Oreo for Mi3 / Mi4

Developed by: Shahan_mik3 | Release: 23.09.2017 | Android 8.x Oreo

Download | XDA Thread

That’s pretty much all currently available Android 8 Oreo ROMS for Mi3 series. As we mentioned above, we’ll try update this most with more ROMs in the future. You can find more Android 7 and 6 ROMs here at https://xiaomifirmware.com/roms/download-custom-roms-xiaomi-mi-3-mi-4/

The post Download Android 8 Custom ROM for Xiaomi Mi3 / Mi4 appeared first on Xiaomi Firmware.

]]> https://xiaomifirmware.com/roms/download-android-8-custom-rom-xiaomi-mi3-mi4/feed/ 0 Download Android 8 Custom ROM for Redmi 3/3 Pro https://xiaomifirmware.com/roms/download-android-8-custom-rom-redmi-3-pro/ https://xiaomifirmware.com/roms/download-android-8-custom-rom-redmi-3-pro/#comments Sun, 24 Sep 2017 13:31:45 +0000 https://xiaomifirmware.com/?p=4863 Hey, guys! Android 8 is coming to Xiaomi phones and today we want to cover the latest beta version of LineageOS 15 Android 8 Oreo Custom ROM for Redmi 3/3 Pro device. We will also list download links for the most stable and best Android 7 Nougat ROMs, which are currently more recommended to install and everyday use. Stay tuned and follow on the social network, including Facebook and Twitter, so you don’t miss any updates! Thank you very much and […]

The post Download Android 8 Custom ROM for Redmi 3/3 Pro appeared first on Xiaomi Firmware.

]]> Hey, guys! Android 8 is coming to Xiaomi phones and today we want to cover the latest beta version of LineageOS 15 Android 8 Oreo Custom ROM for Redmi 3/3 Pro device. We will also list download links for the most stable and best Android 7 Nougat ROMs, which are currently more recommended to install and everyday use. Stay tuned and follow on the social network, including Facebook and Twitter, so you don’t miss any updates! Thank you very much and take care experimenting with Android 8 Custom ROMs, they’re currently under development and recommended for advanced users.

Download latest Custom ROMs for Xiaomi Redmi 3/3 Pro

Android 8 Oreo Custom ROM for Redmi 3

Download Lineage 15.0 for Redmi 3

Lineage 15.0 Oreo for Redmi 3 / Redmi 3 Pro | Developed by: Anik_khan

XDA Thread | Gapps

Best Android 7 Nougat Custom ROM for Redmi 3

Download crDroid for Redmi 3

crDroidAndroid 7.1.1 RC1.0 v2.5 for Redmi 3 | Released: 2017-04-24 | Developed by: moonlight-roms

Official source | Download link | Mirror

ResurrectionRemix for Redmi 3

RR-N-v5.8.3 | Release date: 16.04.2017 | Android 7.1.2

Download from Google Drive (Magisk included)

Download XenonHD for Redmi 3

XenonHD 7.1 Build3 | Release date: 30.12.2016 | Developed by zhafron

Official source | XDA Thread

Download Lineage OS 14.1 for Redmi 3

Official build of Lineage OS 14.1 Android 7 Nougat for Xiaomi Redmi 3 and Redmi 3 Pro.

Official website

Download AOSP Extended for Redmi 3

Official build of AOSP Extended Android 7 Nougat Custom ROM for Xiaomi Redmi 3 and Redmi 3 Pro.

Official website

Download AICP 7.1.2 for Redmi 3

Latest release of Android Ice Cold Project Custom ROM for Redmi 3 (ido) device. Release date: 19.09.2017.

Download | XDA Thread | Gapps | BeansGapps

Download XOSP CUSROM for Redmi 3

Latest release of XOSP Android 7 Nougat Custom ROM for Xiaomi Redmi 3 and Redmi 3 Pro (ido) phones. Release date: 30.04.2017

Download | XDA Thread | Source link

Download AOKP Cusrom for Redmi 3

Latest release of AOKP Android 7 Nougat CusROM for Xiaomi Redmi 3 and Redmi 3 Pro (ido) phones. Release date: 28.04.2017

Download | Source link

Official MoKee ROM for Redmi 3

Below you’ll find a link to official MoKee ROM website and download latest version of Android 7 Mokee Cusrom.

Source link

Download Pure Nexus ROM for Redmi 3

Another fresh Android 7 Nougat Custom ROM for Redmi 3 (ido). This ROM have many positive feedback on XDA.

Download | XDA Thread

AIM ROM for Redmi 3

One of the recently released Android 7 Cusrom for Redmi 3 (ido).

Download | XDA Thread

The post Download Android 8 Custom ROM for Redmi 3/3 Pro appeared first on Xiaomi Firmware.

]]> https://xiaomifirmware.com/roms/download-android-8-custom-rom-redmi-3-pro/feed/ 1