Please note and keep in mind that everything you do is at your own risk. Neither the authors of this post, nor the original person who wrote these instructions takes no responsibility for your actions.

Make sure to back up your IMEI code and also all your important personal data before proceeding with the following guide. Good luck!

Installing Custom kernel on Redmi Note 10S (rosemary/secret)

Firstly we will revisit the method with ADB manual installation. Please make sure that you meet all the requirements:

1. Unlocked bootloader.
2. All correct drivers are installed on your PC.
3. Download the vbmeta.img file. Download link: vbmeta.rar
4. Downloaded .img kernel file you’re planning to flash.

Now follow these steps:

1. Make sure that vbmeta.img and downloaed kernel .img are located in the same folder with adb. The folder can be named differently, but it’s the one where you’ve platform-tools installed.
2. Start your phone in fastboot mode.
3. Open the terminal window from the folder with adb and check if your phone is identified with the following command, you should see device serial number:
   • fastboot devices
4. Use the following command to flash the custom kernel file, where “kernel_name” is the name of the downloaded file name:
   • fastboot flash boot kernel_name.img
5. Next, enter the following command to apply the vbmeta patch:
   • fastboot –disable-verity –disable-verification flash vbmeta vbmeta.img
6. Reboot into the system:
   1. fastboot reboot

Here’s the tutorial on how to install the custom kernel via TWRP Custom Recovery. To use this method you must have TWRP installed on your device.

1. Download and copy custom kernel archive to phone internal memory.
2. Reboot into TWRP Custom Recovery.
3. Go to “Install” menu and select the downloaded archive.
4. Proceed with installation and wait until it’s finished.
5. Go back to the main menu and reboot into system via TWRP menu: Reboot > System.

That’s pretty much it. You can share your experience about flashing custom kernel versions on your device in the comments below.

The post How to flash custom kernel on Redmi Note 10S appeared first on Xiaomi Firmware.

Latest custom kernels for Xiaomi Mi 5

Android 6.0.1 Marshmallow Custom Kernels for Mi5

mKernel R1

Developed by msdx321 | XDA Thread | Download

How to install mKernel R1?

Very simple: Boot into TWRP Custom Recovery and install downloaded .zip archive with custom kernel.

Falcon Kernel

Developed by Harrynowl | XDA Thread

How to install Falcon Kernel?

Boot into TWRP Custom Recovery and install downloaded .zip archive with custom kernel.

Brand Kernel 1.2

Developed by WhyOrean | XDA Thread

How to install Brand Kernel 1.2?

Boot into TWRP Custom Recovery and install downloaded .zip archive with custom kernel.

Android 7.1 Nougat Custom Kernels for Mi5

DragonXia Kernel v3.9

Developed by WhyOrean | XDA Thread

Xceed Kernel Nougat (LOS/CM)

Developed by kairi_zeroblade | XDA Thread | Download

Standard snapdragon 820 kernel

Developed by mrmathematica | XDA Thread | Download

How to install Standard snapdragon 820 kernel?

Flash .zip file after each Lineage OS update.

The post Download Custom Kernels For Xiaomi Mi5 appeared first on Xiaomi Firmware.

Custom Kernels for Redmi 3S

Before downloading and flashing any of these custom kernels, make sure that you’re completely understand what you’re trying to do!

GearBox G1 Kernel for Redmi 3S

About: Developed by nibaji | Current status: Beta | Stable release: 28.02.2017 | Latest release: 05.03.2017

GearBox G1 | XDA Thread | Download link

Soviet Star Kernel for Redmi 3S

About: Developed by NATO66613 | Current status: Beta | Stable release: 27.02.2017 | Latest release: 06.03.2017

Soviet Star | XDA Thread | Download link

Eximious Kernel for Redmi 3S

About: Developed by bishnuprasad884uu | Current status: Stable | Stable release: 10.03.2017 | Latest release: 10.03.2017

Eximious | XDA Thread | Download link

The post Download Custom Kernel for Xiaomi Redmi 3S appeared first on Xiaomi Firmware.

Download and install custom kernel on Redmi Note 3 Pro

How to flash custom kernel on Redmi Note 3 Pro with TWRP

1. Download custom kernel you want to install and copy it to phone memory.
2. Boot into TWRP Custom Recovery and wipe “Cache” & “Dalvik Cache” (may not be necessary depending on kernel version).
3. Make backup of currently installed kernel version. Open “Backup” menu in TWRP, and select only “boot” partition. Swipe to confirm backup.
4. Now backup lib and lib64 folders. Use any file manager app to find and save these folders. If you want to downgrade back to stock kernel, you’ll need to restore these folders. Otherwise you can simply backup whole “system” and “boot” partition with TWRP (lib and lib64 folders are located in system partition).
5. Now we want to install custom kernel on our device. Open TWRP Custom Recovery, select “Install” and choose previously downloaded custom kernel version. Swipe to confirm installation.
6. After installation is finished, wipe “Dalvik” and “Cache”.
7. Reboot into system and enjoy freshly installed kernel.

Another method of installing kernel with TWRP:

1. Download kernel boot.img file and copy to phone memory.
2. Boot into TWRP Custom Recovery.
3. Select “Install img”.
4. Find downloaded kernel .img file.
5. Swipe to confirm. Select “Boot” partition and install.
6. Wipe “Dalvik” and “Cache”.
7. Reboot into system.

Download custom kernel for Redmi Note 3 Pro

Radon Kenzo V4.7: XDA link

NeonKerneL: XDA link

AGNi pureMIUI-MM: XDA link

Blaze -6: XDA link

GUYVER Kernel: XDA link

ZETSUBOU Kernel: XDA link

The post [Download] Custom Kernels for Redmi Note 3 Pro appeared first on Xiaomi Firmware.