Tutorial on how to root Meizu Pro 6/6S and flash Google Apps

Enable Root on Meizu Pro 6 though Flyme account

1. Download and install Terminal Emulator from Play Market.
2. Now download two required patches copy these to phone internal memory:
   • pro.sh
   • pro1.sh
3. Now start Terminal Emulator and type the following commands:

   su
   sush /sdcard/pro.sh
   sh /sdcard/pro1.sh

4. Reboot

How to enable root on Android 7.1.1 version

1. Set “System privileges” to “Open”.
2. Install SuperSU 2.79 apk file, update the binary file and press “OK!”. Do not reboot your device at this step, otherwise you’ll get bootloop!
3. Enter SuperSU, “grant” access for root.
4. Download and install “BusyBox” and “Mobile Odin / Flash Fire”
5. After you’ve installed all the tools above, you’ll need to install the same SuperSU version for recovery via Flash Fire.
6. Reboot your phone and enjoy root.

How to root “A” and “Beta” firmware versions?

1. Sign in into your Flyme account.
2. Then go to “Security” menu (could be also named as “Fingerprint and security”).
3. Then tap on “Root permissions” and confirm root access.

Binary file in superSU isn’t updating

Here’s a solution in case you’ve got an error while trying to update the superSU binary file:

1. Delete currently install SuperSU version from your phone.
2. Download the same ROM version which you have right now on your phone.
3. Now reinstall ROM without any wipes.
4. Reboot your phone, go to “Settings” > “Security” > “Root” > “Enable”.
5. After your phone reboot, go straight to Google Play and install SuperSu.
6. Start SuperSU, confirm binary file update, enable root access for it and select “Normal/TWRP”, wait until  installation is completed.

How to install Opengapps on Meizu Pro 6

This method works with a fresh ROM installation.

1. Enable root with Flyme account.
2. Install SuperSU 2.79.
3. Download and install BusyBox.
4. Install FlashFire Pro 0.55.1.
5. Download the latest version on Gapps from OpenGapps. You’ll need the following OpenGAPPS version: ARM64, 6.0, Pico. Copy downloaded archive with Gapps to phone root memory.
6. Open FlashFire and give root access to it. In FlashFire press “Flash ZIP via OTA” > Select open_gapps .zip archive > Continue to flashing.
7. After flashing is completed, the phone will automatically reboots.

The post How to root Meizu Pro 6 and install Gapps appeared first on Xiaomi Firmware.

This tutorial will help you in the following cases: for example, if your tried to flash some beta ROM with FlashFire and get bootloop in result and now you can’t enter recovery mode. If you see “Red State Your device has failed verification and may not work properly your device will boot in 5 seconds” message when trying to turn on your phone.

Restore and fix hardbricked Meizu Pro 6

What’s required?

• • MRT Dongle
  • MRT Dongle software: mrt_1.98_fix.7z
  • Special firmware version: Meizu_Pro_6_MRT_Firmware.7z
  • Driver Auto Installer v1.352.00: Driver_Auto_Installer_v1.352.00.7z

Now after you’ve prepared everything what is required, we will continue with the following steps. Some users reporting that this method isn’t working on Windows 10 x64, in this case try to use Windows 7 version.

1. Disable drivers signature enforcement on your PC.
2. Download and install drivers using Driver Auto Installer.
3. Connect MRT Dongle to PC via USB 2.0. Most probably, it won’t work on USB 3.0.
4. Download mrt_1.98_fix.7z and open MRT_1.98.exe.
5. Click on “Meizu” tab in the top right corner and select your device model, “PRO 6” in this case.
6. You’ll see the following message: “Connect to Service Success”.
7. Select “Write Flash” in “Operation Options”, press “Open” and locate previously downloaded ROM. That’s “MT6797_Android_scatter.txt” file in “Meizu_Pro_6_MRT_Firmware” folder.
8. Now we press “Start” button. You should see “Searching Mobile Port…” message.
9. At this point you need to turn off your device, then press and hold “Volume Down” button and connect your phone to PC via USB cable at the same point, release the “Volume Down” button as soon as flashing process start. If the following method doesn’t work for you, you may try to boot into fastboot mode firstly by pressing “Volume Down” and “Power” buttons at the same time. Hold these two buttons for 8 seconds, and release them after your device boot into fastboot, then press “Volume Down” and “Power” buttons, release the “Power” button when the screen turns off and keep holding “Volume Down”. Flashing process should start.

Here’s another method, which doesn’t require you to use the MRT Dongle.

1. Download Write efuse v7.4.0 tool: Write+efuse+V7.4.0+Key+Mod+Meizu.7z
2. Now select Scatter File “MT6797_Android_scatter.txt” from the “Meizu_Pro_6_MRT_Firmware” folder.
3. Activate all check marks:
4. Press “Start All” and try different combinations of “Volume Down” and “Power” buttons similar to the method above.

The post How to unbrick and fix bootloop on Meizu Pro 6 appeared first on Xiaomi Firmware.