How to flash and unbrick Redmi Note 4 with SP Flash Tool

1. First make sure you’ve got all required USB drivers installed on your PC or laptop.
2. Next download official fastboot ROM for Redmi Note 4.
3. Extract downloaded ROM to C:\ drive.

   

4. Download cust.img file and replace cust.img in “images” folder. (on some latest ROM versions it works without replacing cust.img file. In case of error you’ll need to replace cust.img)
   1. Download cust.img for China ROM
   2. Download cust.img for Global ROM
5. Start SP_Flash_Tool_v5.1620 as administrator (right mouse click and “Run as administrator”)
6. In “Download-Agent” select “MTK_AllInOne_DA.bin” file. It is located in the same folder as Flash Tool.
7. In “Scatter-loading File” select “MT6797_Android_scatter.txt”. It is located in the “images” folder.
8. Select “Download only”.
9. Remove checkbox from “userdata” in case you want to save your data and apps. Otherwise the personal data and apps will be removed.

   

10. Now press “Download” button with green arrow.
11. Turn off your device and connect to PC via USB cable.
12. Wait until you see “Download OK” message.
13. Disconnect your device from PC and turn it on. First startup will take around 10-20 minutes.

Here’s a few recommendations. Use stock or other high quality USB cable. Connect your device via USB 2.0. On desktop PC use rear USB ports.

Possible issues and solutions flashing Xiaomi Redmi Note 4

In case of “STATUS SEC IMG TOO LARGE” error.

Replace cust.img

In case of “STATUS DOWNLOAD EXCEPTION” error.

Try different USB port. Replace cust.img

Nothing happens when I connect Redmi Note 4 to my PC.

Make sure you’ve installed required USB drivers. Try different USB port. Disconnect and connect again.

Error when I connect Redmi Note 4 to my PC.

Connect your device while holding volume button down until you’ll see yellow bar.

I’ve installed USB drivers but device is still not connecting.

Remove previously installed drivers with USBDeview and re-install latest version.

Redmi Note 4 device doesn’t respond to anything.

Hold all three buttons (vol -, vol + and power button) for 20 seconds.

In case of any other error messages.

Try different SP Flash Tool version.

I can see rabbit logo and flashing is not starting.

Turn off your device before connecting it to PC. Flash Tool works with turned off device.

Redmi Note 4 is bricked after flashing.

Disconnect the battery cables and adapters for 10 minutes. Try flashing again.

The post Redmi Note 4 SP Flash Tool Unbrick and Flash Guide appeared first on Xiaomi Firmware.

How to flash recovery with SP Flash Tool on Xiaomi Redmi Note 4

1. Run SP Flash Tool

   

2. In the “Download-Agent” field, press “Choose” and enter the path to the “MTK_AllInOne_DA.bin” file. It is located in the folder with SP Flash Tool.

   

3. In the “Scatter-loading File” field, specify the path to the “MT6797_Android_scatter.txt” scatter file. It is located in the “images” folder of downloaded recovery ROM. In the drop-down menu select “Download Only”.
4. Remove all the checkboxes.
5. In field “recovery” click on the “Location” and select our recovery.img.
6. Make sure you’ve removed all the checkboxes and selected only “recovery” and the mode is “Download Only”.
7. If everything is correct press “Download” button.
8. Now turn off your smartphone and connect it via USB cable to your PC.
9. Right after you connect your device, progress bar in the bottom of the screen will turn red, and then yellow.
10. After about 5 seconds “Download OK” window should appear.
11. Disconnect your smartphone from PC.
12. Hold the “volume up” button and “power button” at the same time. After vibration signal, release the power button and continue to hold the “volume up”. After a few seconds device will boot into just flashed recovery.

Few notes:

• It’s recommended to use stock-kit USB-cable, or other high-quality cable.
• Use rear USB ports.
• Recommended SP Flash Tool version is 5.1620.

The post Flash Recovery using SP Flash Tool on Redmi Note 4 appeared first on Xiaomi Firmware.

Stock Recovery for Xiaomi Redmi Note 4

Download: redminote4_stock_recovery.img

Installation guide

ADB and Fastboot required.

Run CMD and type following commands:

adb reboot bootloader
fastboot flash recovery redminote4_stock_recovery.img
fastboot reboot

The post [Download] Redmi Note 4 Stock Recovery File appeared first on Xiaomi Firmware.

We can suggest you two installation methods:

1. Using TWRP
2. With SP_Flash_Tool

Download Modem Files for Redmi Note 4

Update: P78, P79, P80, P81, P82 and P83 for both TWRP and SP Flash Tool installation.

Modem Files for TWRP Installation

• P83.zip
• P82.zip
• P81.zip
• P80.zip
• P79.zip
• P78.zip

Modem Files for SP_Flash_Tool

• RN4mtk_7.12.14.firmware-update_P83.7z
• RN4mtk_7.12.8.firmware-update_P82.7z
• RN4_firmware-update_P81.zip
• RN4_firmware-update_P80.zip
• RN4_firmware-update_P79.rar
• RN4_firmware-update_P78.rar

Installation Guide

Remember to make a backup of your data!

Using TWRP you can install modem just like a usual patch.

Modem installation using SP Flash Tool

1. Run SP Flash Tool
2. In the “Scatter Loading File” select scatter file from downloaded modem file archive.
3. Make sure you remove the checkbox against “preloader”. Leave the rest as is.
4. Click “Download” button and connect your turned off device.
5. Wait for the flashing to complete, usually a few minutes.
6. Press “Ok”
7. Disconnect USB cable and turn on your device.

The post Modem Files for Xiaomi Redmi Note 4 appeared first on Xiaomi Firmware.

Download Drivers for Redmi Note 4

Primary Redmi Note 4 Drivers and Apps

MiFlash (same as miPhone)

Official flasher for all Xiaomi smartphones. Works on Windows 7, 8 & 10. Sometimes requires unlocked bootloader. Includes all required drivers for USB and ADB. Stuff like: Google ADB tool, Microsoft MTP, RNDIS driver, Qualcomm USB serial driver.

• Download: MiFlash20160830.msi
• Previous version: MiSetup2.2.0.7032_2717.exe

MiFlash Unlock

Software used to unlock the bootloader on Xiaomi smartphones.

• miflash_unlock-1.1.1111.11231.zip
• MiFlashUnlock_1.1.0317.1_en.zip
• miflash_unlock-en-2.2.624.14.zip

SP Flash Tool

Flash tool for flashing offical ROMs. Also using for unbricking your devices. Read more about SP Flash Tool.

• SP_Flash_Tool_v5.1620: SP_Flash_Tool_v5.1620_Win.zip
• SP_Flash_Tool_v5.1640: SP_Flash_Tool_exe_Windows_v5.1640.00.000.zip

USB Drivers for Windows

These drivers also required for SP Flash Tool to work. In case you’ve installed MiFlash you don’t need these drivers.

• Download: latest_usb_driver_windows.zip

Additional Redmi Note 4 Drivers and Utilities

Mi PC Suite

Official software for your PC: driver installation, flashing, backup. Doesn’t work with Android 6 at the moment. Includes all required drivers for Xiaomi smartphones.

• Mi PC Suite: MiSetup2.2.0.7032_2717.exe

USBDeview

Software used to identify and remove currently installed  USB drivers on your computer. Check out full post.

• Download: usbdeview.zip

ADB (Android Debug Bridge)

Console PC software for debugging Android devices.

• ADB Installer v1.4.3: adb-setup-1.4.3.zip

File unsigner

Software for removing driver digital signature.

• Download: FileUnsigner.exe

MauiMETA

IMEI restoration and model tools. Check out full post.

• Download: MauiMETA_v9.1635.23.rar

Mobileuncle MTK Tools & ToolHero

Custom recovery flashing, IMEI & other tools.

• Toolhero 2.0.16: toolhero_216.apk

The post [Download] Xiaomi Redmi Note 4 Drivers & Utilites appeared first on Xiaomi Firmware.

It’s quite fascinating to see meteoric rises and dramatic falls in the tech world. Until a year ago, the term ‘Xiaomi’ would have been rebuked as an obscure name from a third world Asian country by most people outside Asia. Cut to the present, the smartphone manufacturer dubbed as the ‘Apple of the east’ has already beaten Apple and Samsung in China and is now among the top 10 smartphone manufacturers in the world. It was in the top 5 until a month ago.

And now folks, Xiaomi has its eyes set on Uncle Sam himself. If experts are to be believed, it is all set to deliver a sucker punch to the extremely volatile Android market in the US with its feature packed phones at ridiculously low price points.

America and the west can’t stop drooling but very little is known about Xiaomi’s phones in this part of the world. If you have been contemplating getting yourself a Xiaomi smartphone but had no idea which model to buy or what separates one from the other, then this guide is going to help you understand the basics of Xiaomi including its various smartphone ranges like MI and Redmi.

What makes Xiaomi smartphones so popular?

For a long time, the market for smartphones in China was dominated by phones in the two extreme ends of the price point. At one end, there were the Apples and the Samsungs fighting it out for dominance and at the other end, there were unnamed pirated phones which had no quality control or guarantees.  If it refused to work out-of-the-box, the best you could do was bear it with a smirk. What China (and the rest of the world to be honest) needed was a smartphone brand that could club quality components, a user friendly UI and rock-bottom prices without tradeoffs.

Xiaomi’s entry filled that void to such an extent, that the company has been setting new records for preorders.
There are two ranges of phones from Xiaomi that you need to be aware of.

1. MI Range: Often dubbed as the premium range of smartphones from Xiaomi, the MI range was the flagship range for the company in its initial years. The features of these phones include super fast processors, great quality cameras and an incredibly sleek design with a camera that nests inside the casing and does not protrude. The MI 1 was the first phone in this range and the most recent addition has been the MI 5.
2. Redmi: The Redmi range which became an overnight rage following the success of the Redmi Note is focused on the budget-minded customer without cutting too many corners. Everything from the MIUI interface to the customer-focused features, Redmi will give you the user friendliness of an Apple at less than half the price.

Today, we take a look at the best of Xiaomi’s offerings in the market circa 2017. These include smartphones from both the ranges that we spoke about and are considered to be the best smartphones at these price points even when compared against much higher priced brands like Google, Apple, Samsung and Motorola.

#1 – Xiaomi Redmi Note 3 Pro 32Gb

The Redmi Note 3 is the smartphone that put Xiaomi in the spotlight at a global level. The world suddenly sat up and took notice for here was a phone that boasted of a 5.5 inch full HD display, a hexa-core Snapdragon 650, Xiaomi’s own MIUI 7, a 16 MP rear camera, a 5 MP front camera and yet, was priced just over $150.

There had to be a catch. But naysayers were soon disappointed due to the apparent lack of nits to pick as the Note 3 became one of Xiaomi’s bestselling phones ever.

Metallic Body

How many times have you seen an all-metal chassis in a budget priced smartphone? Xiaomi officially enters the turf that was reserved for high end smartphone models from Sony with the aluminum Ingot casing that weighs a feeble 164 grams.

Super fast processor

The Redmi Note 3 stays true to its brand promise and packs in a 1.4GHz hexa-core Qualcomm Snapdragon 650 which not only ensures super fast applications but also ensures that there are no lags while playing resource intensive games.

Excellent battery life

The recently launched Samsung S7 Edge which retails for over $750 has a 3600 mAH battery while the Xiaomi Redmi Note 3 has a 4000 mAH battery. Need we say more?

Crisp and vibrant pictures

The 16 MP rear camera with an f/2.0 aperture produces razor sharp images with excellent color reproduction. The 4 MP front camera is not the best feature of the phone but the quality is good enough for both selfie crazies as well as business video calls. The HD display with the 1,920 x 1,080 and 403ppi make a vivid combo that results in crystal clear viewing.

Verdict: Unbeatable package! Until Xiaomi or some competitor manages to surpass the impeccably high standards set by the Note 3, this offers unbeatable value for money. Save yourself a few hundred dollars and grab the Redmi Note 3 while it is still available for purchase.

#2 – Xiaomi Redmi 3S 16Gb

With the Redmi 4 popping its head over the horizon, it was expected to be a bumpy ride for the Redmi 3S to carve a position for itself in the market. The fact that it is the last phone from the third generation of Redmi didn’t seem reassuring either. But as always Xiaomi pulled a rabbit out of the hat and the Redmi 3S has been a roaring success.

Available in two versions, the Redmi 3S and the Redmi 3S Prime, the smartphone boasts of Redmi’s trademark metal shell, an all new MIUI 8 and a whopping 4100 mAh battery.

A worthy upgrade to the Redmi 3

When you are working to upgrade a successful smartphone, you are treading a thin line. But Xiaomi’s Redmi 3S is every bit worth the upgrade. They have tweaked the design a tad, added a swanky new processor and a fingerprint scanner. At the price point, this is a steal.

The 5 inch HD screen remains unchanged in the 3S and despite the lower resolution, the IPS tech delivers a great viewing experience with realistic color representation and flawless viewing angles.

Good battery, Responsive performance

A review of the Redmi 3S would be incomplete without mentioning the 4100 mAh battery. There’s more juice in the phone than most $1000 smartphones in the market. You wont be left groping for your power bank in the middle of performing important tasks for sure.

The all-new Snapdragon 430 with the 64-bit octa-core chip and the 2GB RAM make this one of the fastest smartphones. The apps load fast, the camera responds at a touch and there are no jitters or delays during games. Cannot ask for more.

Verdict: The best smartphone under $100! That’s what GSM Arena rated it too. Do yourself a favor and gift yourself one of these. It will be the best $100 you will ever spend on a smartphone.

#3 – Xiaomi Redmi Pro 64GB

Just when we thought that Xiaomi couldn’t better itself, it comes up with the Redmi Pro, which is a beast of a phablet by any standards. This is as feature rich as they come but yet, is surprisingly different from most of Xiaomi’s Redmi and MI range of smartphones. At the forefront of the laundry list of features is a dual camera, 5.5in OLED display, 10 cores and USB-C connectivity, once again at a mid budget range.

A commanding presence

The Redmi Pro is not petite. But it was never intended to be so. The brushed metal chassis is 8.2mm in thickness and it weighs 174 grams. But the beautiful curves which is retained from the Xiaomi MI 5 ensures that the ergonomics are taken care of. You can hold, lift and click pictures with ease without the risk of the phone fumbling out of your hands. Also, despite the size, it slips effortlessly into your pockets.

The iPhone Turf

When HTC started the dual camera trend, it quickly caught on and the latest one to sport it is the iPhone 7. Redmi Pro is Xiaomi’s first phone to feature this with a 13 MP main camera and a 5 MP second camera which club to give you excellent pictures with depth of field. You can mimic the bokeh effect that DSLR cameras are famed for.

There’s ample scope for playing around with the images to achieve the results that you desire. This alone is one reason to put this on your wish list.

Also, this is Xiaomi’s first foray into the world of AMOLED screens and we are certainly not complaining. The 1,920 x 1,080 resolution delivers an excellent viewing experience for both streaming videos as well as games.

Last but not the least; the MediaTek Helio X20 with 3GB and 10 cores delivers a smooth and fluid experience with apps and games.

Verdict: If you wanted a phablet that is packed with featured but priced under $300, you’ve just found your best choice. The Xiaomi Redmi Pro 3 is truly a beast.

#4 – Xiaomi Redmi Note 4 64Gb

To push the envelope on a premise that has been a wild success is no mean feat. But count it on Xiaomi to make it happen every single time. The Redmi Note 4 is another amazingly feature rich smartphone from their stable with a very desirable price tag.

The feature set is highlighted by 64GB storage and 3GB RAM, a 5 megapixel front camera with f/2.0 aperture, an IR blaster and 4,100mAh battery.

Sturdier metal body

Ever since the Note 3, there has been an upgrade in the manufacturing procedure at Xiaomi which is evident in the metallic body (solid aluminum ingot) which is clearly better quality. The trade off is that it’s slightly heavier too at 175g but the difference is only meager. And it is still lighter than the iPhone 7 Plus.

Crisp and colorful display

The 5.5-inch display with the 2.5D arc glass makes for a pleasurable viewing experience with great colors and perfect angles. Even when tested in bright outdoor sunlight, the display is on par with what you’d normally expect from high end phones.

Fast processor

On the 3GB Ram version, the MediaTek Helio X20 processor is lightning fast. Everything from multi-tabbed browsing to multitasking with apps is a breeze. You wont experience lags or delays even while enjoying graphic-heavy games.

Mediocre camera

We hate to say this, but the camera on the Redmi Note 4 is a letdown especially when you pit it against the amazing camera on some of its predecessors. That’s despite the dual LED flash. But if clicking photographs is not your primary use of your smartphone, you’d have no nits to pick with the Redmi Note 4.

Verdict: The Redmi Note 4 is a worthy successor to the Note 3. The beefed up storage, the faster processor and the improved design make it a great buy for a few dollars more.

#5 – Xiaomi Mi Max 32Gb

The Mi Max is Xiaomi’s entry into official Tablet territory that was for long dominated by Samsung’s Tab series. It sports a massive 6.44 inch HD display, dual LED flash, a fingerprint sensor, hexa-core Qualcomm Snapdragon 650 and 3GB of RAM.

It borrows some of the specifications from the immensely popular Redmi Note 3 and amps it up to create one beefy phablet that you’d love to carry for both professional as well as leisure uses.

Practical Design with a great display

The all-metal construction clubbed with the massive screen make the Mi Max a beefy phone. It is a tad heavier than normal smartphones too at 203g.

But to make up for the bigger size, Xiaomi gives it a minimalistic design and slim profile (7.5mm) with rounded edges that make for comfortable carrying and one-handed typing. Xiaomi has integrated a ‘One handed mode’ in the settings which makes it easier to type with one hand by shrinking the contents of the screen to a smaller area.

The display with Xiaomi’s Sunlight Display tech makes for crystal clear viewing even on a bright and sunny day outdoors.

4K video recording and a massive battery

Both, the rear 16 MP camera as well as the 5 MP front cameras deliver amazing picture quality. The images are sharp with excellent detailing around the edges. Xiaomi has clearly put some work behind this, which was one of the features where it was found lacking.

Powering this huge phone is a massive 4850mAh battery which will keep the phone running for two to three days even with active usage. On the usage front, both the MIUI 7 and the Snapdragon 650 keep things pleasing and blazing fast.

Verdict: With an excellent build quality, great display and a massive battery, the Mi Max is a dream come true for people looking for a big sized phablet with a budget price tag.

The post [Review] Top 5 Best Xiaomi Smartphones appeared first on Xiaomi Firmware.

First method:

Basically this method is about deleting everything from cust.img file. What’s required?

1. Download Latest China Stable or China Developer Version ROM from http://en.miui.com/a-234.html
2. Download SP_Flash_Tool
3. Download clear cust.rar
4. Unpack and replace the original cust.img file (around 500 mb) with the new file (6kb).
5. Launch SP flash tools and select MTK_AllInOne_DA.bin
6. Press “Download” and connect your device via USB cable
7. Wait for the flashing, disconnect your smartphone and then reboot

Second method on how to unbrick with global cust.img:

1. Download Latest China Stable or China Developer Version ROM from http://en.miui.com/a-234.html
2. Download cust_global.rar (2.9 mb)
3. Unpack and replace the original cust.img file (around 500 mb) with the new file (2.9 mb).
4. Open Smart Phone Flash Tool
5. Go to “Download” section
6. Remove the mark against “preloader”
7. Press “Download”
8. Wait for the flashing, disconnect your smartphone and then reboot

The post Unbrick Xiaomi Redmi Note 4 with cust.img appeared first on Xiaomi Firmware.

Download rom with flash tool: SP_Flash_Tool_V5.1636_withrom.rar

SP Flash Tool Guide for Redmi Note 4

1. Remove old drivers, everything that is related with MediaTek
2. Reboot
3. Install MT65x3 USB VCOM drivers и Driver_Auto_Installer_v5.1453.03. drivers
4. Open flasher app (can be SP_Flash_Tool_V5.1636)
5. In “Option” > Download > Select “USB Checksum” and “Storage Checksum”
6. Select scatter file. Under “Scatter-loading file” find path to “MT6797_Android_scatter.txt” or similar.
7. Turn off your smartphone
8. In SP_Flash_Tool press “Download”
9. With volume button down a connect your smartphone via USB cable to your PC
10. Red line will appear,  then yellow. Now the button can be released.
11. Wait until flashing is completed.
12. Congratulations!
13. Reboot your smartphone. First startup can take longer than usual.

Drivers for Xiaomi Redmi Note 4

Driver Auto Installer: Driver_Auto_Installer_v5.1453.03.rar

USB Drivers: MT65x3 USB VCOM drivers.rar

The post MTK Driver Install and SP Flash Tool for Redmi Note 4 appeared first on Xiaomi Firmware.

This flasher tool is easy to use & solve different problems with your Redmi Note 4 device.

Unlocked bootloader required. Everything is done at your own risk!

TWRP 3.0.2 Features

• Redmi Note 4 Support
• ZCX TWRP 3.0.2-X (v20161025) recovery
• SuperSU v2.76 build-in
• New interface theme
• OTA Update support
• Data decryption section in Android 6.0 support
• Downgrade to stock recovery
• OEM Information
• Root access
• Easy to use

What’s required?

• Unlocked bootloader
• USB
• Disable digital signature verification for drivers in the Windows 7, 8, 10 64-Bit
• Enable USB debugging: Go to Settings > Extras > Developer Options > Debugging USB – enable. (If developer options are not activated, then go to Settings > About > Tap on “MIUI version” 7 times > now developer options are available.)
• Battery charge at least 50%

Required utilities:

• Universal flasher: FLASHER TOOLKIT NikelV3.zip
• Minimal ADB and Fastboot v1.4.1: minimal_adb_fastboot_v1.4.1_setup.exe
• BETA-SuperSUv2.78 SR1 (upon your choice): SR1-SuperSU-v2.78-SR1-20160915123031.zip

TWRP 3.0.2 Install Guide Redmi Note 4

1. Download “Minimal ADB and Fastboot v1.4.1” and install. Next download the “BETA-SuperSUv2.78 SR1.zip” (optional) and move it to “Download” folder on your smartphone.
2. Turn your phone on and connect it via USB cable to your computer.
3. Download “FLASHER TOOLKIT NikelV3.zip”, unpack and run “FLASHER TOOLKIT Nikel.bat” “as administrator”.
4. You will see a menu with different options. Select the first option to install ZCX TWRP 3.0.2-X recovery. Follow the instructions on the display. Input the menu number and press ENTER.
5. As soon as the recovery firmware is completed, change the TWRP language.
6. Return to settings and select “Support MIUI-OTA” and “Disable Boot-System DMI-Verify”
7. Then, for the first time you need to install the firmware rom (Global or China) again.
8. To get root access you’ll need SuperSU. It’s integrated. To do this go to “Advanced” > “SuperSU” and follow the simple instructions.

Just in case, here’s the link to the latest recovery rom version: ZCX-TWRP-3.0.2-X-REDMI_NOTE4-MTK_Nikel-16.11.18.img

The post TWRP 3.0.2 – Universal Tool For Redmi Note 4 appeared first on Xiaomi Firmware.