Download latest Custom ROMs for Xiaomi Mi4c

Android 8 Oreo Custom ROM for Xiaomi Mi4c

Download LineageOS 15.0 for Mi4C

LineageOS 15.0 Alpha | Android 8.0 | Developer by Cozzmy13 & csolanol

Download from AndroidFileHost | Gapps | XDA Thread

Android 7 Nougat Custom ROM for Xiaomi Mi4c

Download Lineage OS for Xiaomi Mi4C

Lineage OS  | Official | Android 7.1.2

Download | XDA Thread

Download AICP 12.1 for Xiaomi Mi4C

Android Ice Cold Project | Official | Android 7.1.2

Download

Download TWRP 3.1.1 for Xiaomi Mi4C

The latest version of TWRP Custom Recovery, suitable for both new and old bootloader version. Developed by Cozzmy.

Download: twrp-20170817-0823.img

How to install Google Apps (Gapps) on Xiaomi Mi4C?

1. Boot into TWRP Custom Recovery.
2. Wipe “System” partition.
3. Install any custom ROM verson.
4. Install Gapps.
5. Wipe “Dalvik” and “Cache” partitions.
6. Reboot into system.

How to update Google Apps (Gapps) on Xiaomi Mi4C?

1. Boot into TWRP Custom Recovery.
2. Install Gapps.
3. Wipe “Dalvik” and “Cache” partitions.
4. Reboot into system.

The post Download Android 8 Custom ROM for Xiaomi Mi4c appeared first on Xiaomi Firmware.

Please pay attention that on official China ROMs, both developer (starting from 6.1.14) and Stable China ROM (starting from 7.2.1.0), Xiaomi has locked the bootloader and removed the root option. On Official Stable Android 5.1 ROM (starting from 7.2.1.0) you can’t get root. If you try installing SuperSU, you’ll most probably get a bootloop. You can freely install SuperSU and enable root on Stable Android 7.1 Nougat ROMs.

Install TWRP Custom Recovery and get rooted Xiaomi Mi 4c

How to flash TWRP Custom Recovery on Xiaomi Mi4c

1. Boot your Mi 4c device into fastboot mode. Turn off your phone, press “Power” button and “Volume Down” until fastboot logo appears on the screen.
2. Download the TWRP archive for Mi4c.
3. Unpack the downloaded archive.
4. Connect your device to PC via USB cable.
5. Open command prompt as administrator and run “recovery.bat” file.
6. Follow the instructions on the screen by simply pressing “Enter” button on a keyboard.
7. Once the installation is completed, close the command prompt.
8. You device should boot into TWRP Custom Recovery mode.
9. On some device, touch mode could be a little bit lagged, simply wait around 1-3 minutes, it should start working after some time.

How to Root Xiaomi Mi 4c

Root Mi4c with a Stable ROM:

1. You must have TWRP Custom Recovery installed!
2. Download the archive with SuperSU.
3. Copy downloaded archive to phone internal memory.
4. Boot into recovery mode.
5. Click “Install” and select SuperSU archive.
6. Confirm with swipe.
7. Reboot into system.
8. Done!

Root Mi4c with a Developer ROM:

1. Locate the “Security” app.
2. Go to “Authorization”.
3. Select ROOT.
4. In the list of application, chose the one’s you want to enable root access.

The post How to install TWRP and Root Xiaomi Mi4c appeared first on Xiaomi Firmware.

Download the best Custom ROMs for Xiaomi Mi 4c

Android 7.1 Custom ROMs for Mi4c

New bootloader Custom ROMs:

• [OFFICIAL] Resurrection Remix N: Download | XDA Thread
• [OFFICIAL] MoKee 71.2: Download | Change-log
• [OFFICIAL] XOSP – CAF: Download
• [OFFICIAL] AospExtended: Download | XDA Thread | Official website
• Lineage 14.1 for Mi4c: Download

Old bootloader Custom ROMs:

• [OFFICIAL] AICP 12.1: Download
• [OFFICIAL] Lineage OS: Download
• AOSP – CAF: XDA Thread
• [UNOFFICIAL] Dirty Unicorns (7.1.2): Download
• Lineage 14.1 (Team Superluminal): Download | Official website

Android 6.0.1 Custom ROMs for Mi4c

Old bootloader Custom ROMs:

• [OFFICIAL] MoKee 60.1: Download | Change-log
• [OFFICIAL] Resurrection Remix M: Download | XDA Thread
• CyanogenMod 13.1: Download | Official website

Android Lollipop 5.1.1 for Mi4c

• CyanogenMod 12.1: Download | Official website

Download Flyme OS for Xiaomi Mi4c

• Download Flyme 6.7.6.13R for Mi 4c: Download
• Download Flyme 5.1.12.23R beta for Mi4c: Download

If you need additional help on how to flash any of these Custom ROMs on your Xiaomi Mi 4c device, check out this guide on how to flash custom ROM on Mi4C.

The post Download Custom ROMs for Xiaomi Mi4c appeared first on Xiaomi Firmware.

Flash Android 7 Nougat on Xiaomi Mi4c and downgrade to Android 5.1

Before you’ll start, pay attention to this steps:

1. Install or update TWRP for Android 5.1: TWRP-3.1.0-2-libra-L.img (39.8 Mb)
2. Make a full backup of your current system using custom recovery! It’s very important.
3. Create a new folder on your device and copy the following stuff:
   • Currently installed Android 5.1 ROM file.
   • Currently installed TWRP Recovery image.
   • Android 7 Nougat ROM.
   • TWRP Recovery for Android 7 Nougat (We recommend TWRP-3.1.0-2-libra-N.img)

How to flash Android 7 on Mi4c

Now we will start flashing Android 7 Nougat on Xiaomi Mi4c device:

1. Boot into TWRP Custom Recovery and wipe all partitions except Internal SD Card.
2. Reboot into recovery.
3. Install downloaded Android 7 ROM and install TWRP .img file right after you’ve installed Android 7 ROM.
4. Reboot into recovery.
5. Wipe “Dalvik / ART” and “Cache”.
6. Reboot into system.
7. That’s it! You’ve installed Android 7 ROM on your Mi4c device.

How to downgrade to Android 5.1 from Android 7

1. Boot into TWRP Custom Recovery.
2. Wipe all partitions, except Internal SD Card.
3. Reboot into recovery. On that step, recovery may not boot on the first startup. No need to panic here! Hold “Power” button and “Volume Up” button now, display will turn off and when it turned on again, release both buttons. TWRP will start.
4. Now install Android 5.1 .zip archive and then immediately install TWRP for Android 5.1.
5. Wipe “Dalvik” and “Cache”.
6. Reboot into system.
7. Complete the setup on the first up.
8. Reboot into TWRP recovery again and restore full backup that you’ve made before installing Android 7 ROM.
9. Reboot into system.
10. Now you’ve downgraded back to Android 5.1 and you’ve got all your previous system settings and apps!

The post [Guide] How to install Android 7 on Xiaomi Mi4c appeared first on Xiaomi Firmware.

Flashing Modem in Xiaomi Mi4c using TWRP recovery

First download the MIUI ROM you want to extract modem file from. Modem file name is – NON-HLOS.bin (In custom ROMs this file is located in “firmware-update” folder).

1. Download MODEM.zip
2. Open this archive using WinRar.
3. Copy previously downloaded and extracted modem file instead of empty NON-HLOS.bin inside of MODEM.zip archive. Compression method set to “Normal”.
4. Now copy updated MODEM.zip into phone internal memory and flash it using TWRP recovery. Do not pay attention to the log files, if you see any errors, since the .zip is made on other device sources.

The post [Guide] How to Flash Modem on Xiaomi Mi4C with TWRP Recovery appeared first on Xiaomi Firmware.

Fix hard brick and unbrick Xiaomi Mi4C

What’s required?

1. Download QFIL (can be downloaded here https://androidmtk.com/download-qualcomm-flash-image-loader-qfil)
2. Download Official 6.1.7 ROM image for Mi4C.
3. Download this patch prog_emmc_firehose_8992_ddr_mbn.rar
4. It’s recommended to have 0% charge battery (not required).

Steps to unbrick Xiaomi Mi4C

1. Connect your device to PC. It should be identified as 9008 (if device is not found, then hold volume down button + power button for 30 seconds).
2. Open QFIL.
3. Select port. 9008 in this case.
4. Select “Flat Build”.
5. In “Programmer Path” field select previously downloaded patch file prog_emmc_firehose_8992_ddr.mbn (it is located in Mi4C folder).
6. In the “Load Xml” field find and select rawprogramm0.xml and patch0.xml files from unpacked Official 6.1.7 ROM image.
7. Press “Download”.
8. Wait around 3-5 minutes and ROM should be installed.
9. Now you’ve got working Mi4C!

In QFIL you should see a successful message. On your Mi4C battery charge indicator should appear. Now wait around 10 minutes for device first startup and then disconnect in from PC. Hope this method helps you!

The post How to unbrick and restore hard bricked Xiaomi Mi4C appeared first on Xiaomi Firmware.

Flashing ROM on Mi4c via fastboot

Note! Only for unlocked bootloader devices.

1. Create new folder on C:\ drive. For example C:\mirom
2. Extract downloaded ROM (libra_images_6.1.7_20151221.0000.11_5.1_cn_b09dac70a0.tgz for example) into this folder.
3. Download ADB tools and extract into the same folder.
4. Your folder should look like this:

   

5. Start your device into fastboot mode (turn off your device then hold volume button and power button).
6. Run “flash_all.bat”.
7. That’s all! Happy flashing!

The post [Guide] How to flash Xiaomi Mi4c using FASTBOOT appeared first on Xiaomi Firmware.