Last updated: November 21, 2026. Short answer: on many POCO, Redmi and Xiaomi phones the screen goes black and the sound jumps to the earpiece while you play a voice message in Telegram or WhatsApp, even when the phone is nowhere near your ear. The cause is the virtual proximity sensor: instead of an infrared sensor, these phones guess “phone at ear” from ultrasound, the microphone and motion sensors, and the guess is often wrong. In Telegram there’s a real fix: turn off Raise to Listen in Settings → Chat Settings. WhatsApp has no such switch, so the options are a cleaner sensor area, a different grip or headphones. Below are all the safe fixes, how to test the sensor in Xiaomi’s CIT menu, and what doesn’t help.
Why it happens: the virtual proximity sensor
Since around 2020, many Xiaomi, Redmi and POCO phones have no separate infrared proximity sensor. They use a software solution, usually based on Elliptic Labs’ ultrasound technology: the earpiece sends an inaudible signal, a microphone listens for the echo, and the gyroscope and accelerometer check whether the movement looks like raising the phone to your ear. Messengers ask the system “is the phone at the ear?” when a voice message plays, and if the answer is a false “yes”, they switch to the earpiece and the system turns off the screen.
Owners in the 4PDA HyperOS club call this “a mass issue, no secret for owners of these devices”, and it shows up in Telegram, WhatsApp and other messengers. Another owner in the club describes it exactly: in Telegram the screen turns off and the sound moves to the top speaker; shaking the phone brings it back, but only for about 5 seconds. In the 4PDA threads, owners say the POCO X7 Pro and X8 Pro use a virtual sensor, while the POCO F8 Pro has a physical one. If you’re not sure about your model, its spec sheet usually says “virtual proximity sensor”.
Telegram: turn off Raise to Listen
This is the only fix that works reliably, because it stops Telegram from using the sensor for voice messages at all:
- Open Telegram and go to Settings → Chat Settings.
- Turn off Raise to Listen. You can also turn off Raise to Speak, which starts recording when you lift the phone.
Telegram added this option in version 9.5.4 (March 2023) in direct response to bug reports, one of which reads: “I have a Poco phone and it is bugged, so I cannot listen to audio with the external speaker. It changes to proximity speaker in the middle of the audio most of the time” (Telegram Bugs and Suggestions). With it off, voice messages and video circles should keep playing through the loudspeaker. The downside: you can no longer listen privately by raising the phone to your ear; use headphones for that.
WhatsApp: no switch, but these help
WhatsApp doesn’t let you turn off the proximity sensor for voice messages. Its help page confirms that WhatsApp uses the sensor to play audio through the earpiece, and that “some screen protectors and cases can disrupt this”. What you can do:
- Change your grip. WhatsApp notes that “your hand or fingers” can trigger the sensor. Hold the phone lower, without covering the top edge near the earpiece.
- Clean the top of the screen around the earpiece and front camera with a microfiber cloth.
- Test without the case and screen protector. A thick case lip or a protector that covers the earpiece grille is a common trigger. If it gets better, use a protector with a cutout for that area. A 4PDA owner who re-applied his protector several times didn’t see a change, so it doesn’t fix every phone.
- Use headphones. With Bluetooth or wired headphones connected, voice messages play in the headphones and the earpiece switch doesn’t apply.
- Restart the phone and update WhatsApp and HyperOS; WhatsApp suggests checking the sensor with a regular phone call too.
Check the sensor in Xiaomi’s CIT menu
CIT is Xiaomi’s built-in hardware test menu. It only runs tests, so it’s safe to open:
- Open the Phone app and dial
*#*#6484#*#*. The CIT menu opens by itself. - Open Proximity sensor. Cover the top of the phone with your hand: the value should change (for example from 5 to 0) and go back when you uncover it.
If the value never changes, the sensor isn’t detecting anything, and the problem is more likely the hardware, the screen (for example after a screen replacement) or a firmware bug. One owner reported that after updating to HyperOS 4 the screen stopped turning off during calls, even though the CIT test passed. In that case, send a report through Xiaomi’s Services & feedback app and check our HyperOS 4 bugs list.
“Speaker PA Calibration Test”: worth a try, but disputed
The header of the 4PDA POCO X7 Pro thread pins this tip as a way to calibrate the virtual sensor without extra apps (4PDA):
- In CIT (
*#*#6484#*#*), tap the three dots at the top and open Additional tools. - Choose Speaker PA Calibration Test, tap calibrate and hold the phone to your ear. Do it in a quiet room, with no music playing.
The author says the sensor then worked “9 times out of 10”. Other owners disagree: some point out that the test calibrates the earpiece amplifier, not the sensor, and on some HyperOS 3 builds it does nothing. Since the virtual sensor relies on that earpiece, it can help, and it’s harmless, but don’t expect miracles. On some models, a real proximity calibration item appears in CIT only with root.
What doesn’t help
- “Proximity sensor fix” apps from the Play Store are made mainly for classic infrared sensors. Results on 4PDA are mixed: an owner who tried calibration apps after a HyperOS 3 update saw no change, and another saw higher battery drain from a sensor automation app.
- Disabling system apps or resetting permissions with root. A POCO X7 Pro owner who did this to cure the problem warned others not to repeat it: most settings get reset and the phone may heat up.
- Some owners with root disable the virtual sensor completely with a Magisk module and lock the screen with the power button during calls. It’s a workaround, not a fix, and we don’t recommend it for most people.
For other HyperOS tweaks, such as pocket mode (which also relies on the proximity sensor), see HyperOS hidden settings.
FAQ
Why does my POCO screen turn off when I play a voice message?
The messenger asks the proximity sensor whether the phone is at your ear. On phones with a virtual (ultrasound-based) sensor, it often answers “yes” by mistake, so the app switches to the earpiece and the screen turns off.
How do I stop Telegram from switching voice messages to the earpiece?
Go to Settings → Chat Settings and turn off Raise to Listen. Voice messages then always play through the loudspeaker.
Can I turn off the proximity sensor in WhatsApp?
No. WhatsApp has no setting for it. Clean the top of the screen, check the case and screen protector, change your grip or use headphones.
How do I test the proximity sensor on a Xiaomi phone?
Dial *#*#6484#*#* in the Phone app, open Proximity sensor and cover the top of the phone. The value should change and return when you uncover it.
Does Speaker PA Calibration fix the proximity sensor?
Sometimes. Some POCO owners report a big improvement, others say it only calibrates the earpiece. It’s harmless to try in a quiet room.
Which POCO phones have a virtual proximity sensor?
Many mid-range models since 2020. On 4PDA, owners report a virtual sensor on the POCO X7 Pro and X8 Pro and a physical one on the POCO F8 Pro. Check your model’s specifications.
Sources: Telegram Bugs and Suggestions (Raise to Listen option, version 9.5.4, March 2023); WhatsApp Help Center on the proximity sensor; 4PDA HyperOS owners’ club (September 2026), POCO X7 Pro discussion (Speaker PA calibration guide by IZZY_RU87 and replies), POCO X8 Pro and POCO F8 Pro discussions, and owners’ reports on CIT calibration, HyperOS 4 and sensor apps (2025–2026).
Xiaomi firmware & news on Telegram
New firmware, HyperOS 4 rollout updates, guides and Xiaomi news, all in one channel.

