Home
Guides and Tips

How to Flash Xiaomi 14 Pro with Xiaomi.eu ROM (Step-by-Step Guide)

Frederick Jerome·
Guides and Tips

Important: All actions are performed at your own risk. Make sure to back up your data before proceeding.

If you want to install the localized Xiaomi.eu ROM on your Xiaomi 14 Pro, follow this step-by-step guide to successfully flash your device. This will help you get a cleaner, bloatware-free experience with better optimization for global users.

Requirements

Before you begin, make sure you have:

  • Unlocked Bootloader: Your bootloader must be unlocked. If you have not done this yet, check Xiaomi’s official guide on how to unlock the bootloader.
  • Fastboot Drivers: Download and install ADB & Fastboot drivers from this link.
  • Xiaomi.eu ROM: Download the latest Xiaomi.eu ROM for your device (link will be updated here).

Flashing Instructions

Step 1: Prepare Your Files

  1. Download the Xiaomi.eu ROM.
  2. Extract the ROM to a convenient location on your PC.

Step 2: Boot into Fastboot Mode

  1. Turn off your Xiaomi 14 Pro.
  2. Press and hold the Volume Down (-) button while connecting your phone to your PC via a USB cable.
  3. Keep holding the button until the device enters Fastboot Mode (you will see the Fastboot logo on the screen).

Step 3: Start the Flashing Process

  1. Inside the extracted firmware folder, find and run the following script:
    • windows_fastboot_first_install_with_data_format.bat
  2. A command prompt window will appear. Type Y and press Enter to confirm.
  3. Wait for the flashing process to complete. This will take a few minutes.

Once the process is finished, the command prompt window will close automatically, and your phone will reboot into the new system.

Troubleshooting Bootloop Issue

In some cases, the phone might get stuck in a bootloop in Fastboot Mode after flashing. If this happens:

  1. Flash the Xiaomi.eu ROM again following the same steps.
  2. If the issue persists, follow this fix:
    • Copy three files from the extracted xiaomi.eu > bin > windows folder to the official firmware folder, where files like flash_all.bat are located.
    • Run flash_all.bat and wait for the process to complete.

After this, your phone should boot into the system successfully.

Final Thoughts

Flashing Xiaomi.eu ROM on your Xiaomi 14 Pro gives you access to a de-bloated, optimized version of MIUI, often with better performance and features than the stock ROM. If you encounter any issues, feel free to leave a comment below, and we will try to help.

Stay tuned for more Xiaomi firmware updates and flashing guides on XiaomiFirmware.com.