Download and install ADB/Fastboot drivers for Xiaomi Mi A1

Let’s start with the required downloads first. Below you can download the latest version of ADB/Fastboot drivers for your system:

• Windows version: tools_r27.0.0-windows.zip
• Linux version: tools_r27.0.0-linux.zip
• MacOS version: tools_r27.0.0-macosx.zip

• Windows version: tools_r26.0.1-windows.zip
• Linux version: tools_r26.0.1-linux.zip
• MacOS version: tools_r26.0.1-macosx.zip

First method:

Now let’s proceed with installation steps:

1. Unpack downloaded drivers to any folder you want.
2. Turn off your Mi A1 Android smartphone.
3. Now start your phone in bootloader/fastboot mode by pressing the “Power” button with “Volume Down” at the same time. You can also proceed with installation if USB debugging is enabled or use ADB Sideload.
4. Connect your phone to PC.
5. Go to “Device manager”.
6. You should see “Android” or “Xiaomi Mi A1” device with yellow exclamation point. Right mouse click on it and select “Update drivers”.
7. Now press “Search for drivers on this PC”. Don’t forget to enable “Include subfolders when searching”.
8. Press “Browse” and locate the “usb_drivers” folder in previously unpacked “Tools” folder.
9. Press “Next” and wait until drivers are installed.

Second method:

In case you still can’t install drivers using the above method, you can always try an alternative one.

1. Unpack downloaded drivers to any folder you want.
2. Turn off your Mi A1 Android smartphone.
3. Now start your phone in bootloader/fastboot mode by pressing the “Power” button with “Volume Down” at the same time. You can also proceed with installation if USB debugging is enabled or use ADB Sideload.
4. Connect your phone to PC.
5. Go to “Device manager”.
6. You should see “Android” or “Xiaomi Mi A1” device with yellow exclamation point.
   • Sometimes Windows automatically install wrong drivers and mixing up different modes. To fix this issue, you have to manually reinstall drivers on your PC.
7. Right mouse click on your device and select “Update drivers”.
8. Press “Search for drivers on this PC” > “Select previously installed drivers” > “Show all devices” > “Install from disk” > Press “Browse” > go to “Tools” folder > “usb_drivers” and open “android_winusb.inf” > press “Ok” to continue.
9. Now for the most important part. You’ll need to remove the check-mark against “Only supported devices”, then you should see three available options:
   • Android ADB Interface
   • Android Bootloader Interface
   • Android Composite ADB Interface
10. Select the correct mode, which you’re currently using the proceed with installation.
11. Congratulations! Correct drivers are now installed on your PC and ready to work.

The post [Guide] How to install ADB / Fastboot drivers on PC appeared first on Xiaomi Firmware.

All You Need to Know about PC drivers for Xiaomi Redmi Note 3

Prominent features of Xiaomi Redmi Note 3:

• Enjoy a display of 5.5-inch touchscreen. Imagine the experience of watching your favorite video album that you have just transferred from your PC to your device. The screen also offers you 178 wide-angle lenses to enjoy enhanced videos and games.
• The company has taken the user experience on a serious note and installed Octa-core media X1- processor for better performance. It means irrespective of what apps you transfer from your PC, they will work just fine. Ensure that you check the correct format before transferring anything to your exclusive Note 3.
• Photography lovers would have never experience such a big screen on their phones with brilliant camera features. 13 MP camera with autofocus feature and dual-tone LED flash. Those who are interested in videography would fall in love with 1080p video recording option. Another key feature to notice is the 5MP front camera with the same recording benefit.
• Increase your happiness of transferring files from PC to Note with up to 32 GB internal storage capacity.
• The connectivity is superb with 4G LTE, 3G, excellent speed of Wi-fi, Bluetooth and GPA.
• Enjoy longer battery life to play videos and games on a late night weekend.

For a quick connection between the PC and Redmi Note 3, we suggest you to download the USB drivers too.  Xiaomi USB drivers not only connect your Redmi Note 3 to PC with convenience but also allow you to build a connection with other Xiaomi smartphones and tablets without additional software download.

Users Experience with Xiaomi Redmi Note 3 PC drivers:

Unlike the other phones revised by Xiaomi for better user experience, Note 3 already comes with many revisions and tests. The software has been rated as a delightful experience by the UK users already. With the help of PC drivers, the challenges of language barrier and complicated preinstalled Google apps will come to an end. Such issues are now possible to tweak within few minutes with such software.

The connectivity in UK and other places have been reported excellent too. Users have shown satisfactory gestures for GPA and GLONASS. Although, the price of Redmi Xiaomi Note 3 is affordable the company has made no compromise in its hardware. Thus, it makes the connectivity with PC worth it.

The USB driver works smoothly with your USB connection and lets your transfer the files and data between your PC and Note. With a combination of fast running drivers and a device like it, users won’t face any interruption in the file transfer process.

Files your PC / ADB drivers transfer from your Redmi Note 3:

• Text messages
• Music tracks
• Video files
• Images
• Contacts stored
• Other compatible data and files that can be viewed on your PC
• Apps

Most of Xiaomi phones need a USB driver to connect to the computer. Try finding a universal USB driver that works on all devices. It will prevent you from the trouble of finding suitable drivers every time for different phones and operating systems.

Quick steps to setup XIAOMI Redmi Note 3 USB driver (Windows PC):

1. Download the latest Universal ADB Driver for Xiaomi USB Drivers and download it to launch it on your desktop.
2. Once the file is installed, you need to extract the files with the right click option of your mouse.
3. Before the installation connect your Xiaomi Redmi Note 3 smart piece to your PC with USB cable.
4. Run the driver file by double clicking the button of your mouse from your desktop.
5. From the main page go to the next step by clicking the next option.
6. The app will now install the necessary drivers.
7. Once your setup is completed click the finish option.

You are now ready to use your Note 3 with your PC. Restarting your PC after the setup will help the drivers work effectively.

Download links:

USB Drivers

• Universal ADB Driver: UniversalAdbDriverSetup.msi
• SP Flash Drivers: mtk_usb_driver_v5.1453.03.zip

SP Flash Tool

• SP Flash Tool v5.1616: SP_Flash_Tool_v5.1616.zip
• SP Flash Tool v5.1640.00.000: SP_Flash_Tool_exe_Windows_v5.1640.00.000.zip
• SP Flash Tool v5.1648.00.000: SP_Flash_Tool_exe_Windows_v5.1648.00.000_2.zip

Mi Flash Unlock Tool

• Mi Unlock 1.0.1225.2: MiFlashUnlock_1.0.1225.2_en_1.rar
• Mi Unlock 1.1.0317.1: MiFlashUnlock_1.1.0317.1_en.zip
• Mi Unlock 1.1.1111.11231: miflash_unlock-1.1.1111.11231.zip
• Mi Unlock 2.2.406.5: miflash_unlock-en-2.2.406.5.zip
• Mi Unlock 2.2.624.14: miflash_unlock-en-2.2.624.14.zip
• Mi Unlock 2.3.803.10: miflash_unlock-en-2.3.803.10.zip

Mi PC Suite

• Mi PC Suite 2.2.0.7032: MiSetup2.2.0.7032_2717.exe

Mi Phone Tool

• Tool for fastboot MiFlash ROM and drivers: MiPhone20141107.exe

MIUI Theme Editor

• MIUI Theme Editor ver. 3.11.15: MIUIThemeEditor_3.11.15_1384520363_jre6.zip

The post Download PC drivers for Xiaomi Redmi Note 3 appeared first on Xiaomi Firmware.

Download PC Drivers and Utilities for Xiaomi Redmi 4X / Prime

MIUI ROM Flashing Tool for Redmi 4X

Xiaomi Mi Flash tool is software developed originally by Xiaomi, and it allows users to flash firmware on their Xiaomi devices. You can use it either for updating and downgrading your Xiaomi’s firmware. Additionally, in boot-loop cases, you can use this tool to flash a Stock Rom on your device and bring it back to life. It can flash any ROM that contains fastboot files through the Fastboot mode or EDL mode only.

Mi Flashing Tool comes in 32 and 64-bit stable versions. It runs on operating system Windows 7 or above. Here you can see how to install it on your computer.

How to Install MIUI ROM Flashing Tool for Redmi 4X

Before you start, make sure you uninstall any version of MIUI ROM Flashing Tool before installing a new one.

1. Download one of the Official Xiaomi Versions (check the links below).
2. Double-click the MiFlashSetup.msi file to start the installation process.
3. Click Next on the first screen.
4. Choose the installing location on the second screen, and click Next again.
5. Now confirm once more time, and wait for the process to finish.
6. Once it finishes, close the installer.

Now you are ready to flash any firmware on your Xiaomi. Happy Flashing!

Official software for flashing Xiaomi phones using the PC or laptop:

MIUI ROM Flashing Tool (MiFlash) | 2017.4.25.0 | Download

Mi Unlock for Redmi 4X

Mi Unlocker is the official bootloader unlocker utility that can unlock the Android bootloader of Xiaomi devices. You can use it on any version of MIUI including the latest MIUI 9. However, before unlocking your Xiaomi’s bootloader with MI Unlocker, you must request permission at the official MIUI Unlock Site. Here is an overview how the whole procedure looks like.

Redmi 4X Bootloader Unlock Process

1. Install the latest ROM update on your device, via the Updater app.
2. Create an account on the official MIUI Unlock Site (if you don’t have already).
3. Log into your Xiaomi device using this account.
4. Request the Unlock permission from your Mi account.
5. Enroll your smartphone for an Unlock in Developer Options and wait 72 hours.

Now you can unlock the bootloader using the Mi Flash Unlock Tool. You can download the latest versions from the links below. These are the official MIUI releases of the software, and are 100% tested by our team.

Official software for unlocking bootloader on Xiaomi phones using the PC or laptop.

Mi Unlock | 2.3.803.10 | Download | Mi Unlock Full Tutorial

QDLoader HS-USB Driver for Redmi 4X

Your Redmi 4X is running a Qualcomm Snapdragon powerful chipset capable of many operations. To get out its maximum, you can install custom ROMs and kernels. QDLoader HS-USB Driver is a tool that allows communication between your Windows computer and Qualcomm-chipset smartphones (like Redmi 4X). This is the driver that you need to install if you want to flash ROMs on your Xiaomi Redmi 4X from your PC.

In general, you can find this driver packed within a newer version of MIUI ROM Flashing Tool, which you can find in the first section of this article. However, if you are using one of the older Mi Flashing Tool, you will need this driver. So, here you can find the official standalone Full Qualcomm QDLoader HS-USB driver. It is available in 32-bit and 64-bit versions. You can download it from the link below.

Qualcomm USB Drivers which are required for flashing Xiaomi phones. Check out this post for more information on how to install Qualcomm USB Drivers on your Windows PC the right way.

QDLoader HS-USB Driver | 32/64-bit | Download

ADB Driver Lite and Platform-tools (adb/fastboot) for Redmi 4X

ADB Lite and Fastboot withot doubt are two of the most fundamental tools used when working with Android-powered devices. For all of you who want to root, modify, tweak, and debug, ADB and Fastboot are a must have. These tools can perform countless rooting and other procedures on the Android platform.

If you really want to learn Android Development, you may want to download and install the full Android Software Development Kit (SDK) – tools for developing Android applications. However, that is unnecessary for all of us who just want to use ADB and Fastboot. To simplify the process for you, we created a specified lite tools packages that will install ADB and Fastboot on your computer quickly and easily. Here you can find the download files.

Drivers and tools for the ADB mode.

Platform-tools (adb/fastboot) | r.26.0.2 | Windows | Download

Platform-tools (adb/fastboot) | r.26.0.2 | Linux version | Download

Platform-tools (adb/fastboot) | r.26.0.2 | macOS version | Download

Minimal ADB and Fastboot

Minimal ADB and Fastboot | 1.4.2 | Setup | Download

Minimal ADB and Fastboot | 1.4.1 | Portable | Download

15 seconds ADB Installer | 1.4.3 | Download

HashTab | Download | Tool for checking MD5 hash of downloaded files. It provides OS extensions for calculating file hashes. This tool supports many hash algorithms such as SHA1, SHA2, MD5, HAVAL, Whirlpool, and RipeMD. It has a friendly interface and supports drag-and-drop actions. Comparing two files and vetting the integrity of a downloaded file was never so easy as while using HashTab.

USBDeview | Download x64 / Download x86 | Tool for checking the list off all USB devices with the possibility of their removal from the system. It provides as much information for your plugged USB device as it can (device’s description, type, serial number, etc.)

USB Deview allows you to uninstall unused USB devices that you previously used or disconnect USB devices that are currently plugged into your computer. It also allows enabling and disabling your connected devices.

Final Words

There you have it. These are the essential tools and utilities that you need for rooting your Xiaomi Redmi 4X and playing with the Android platform capabilities on a higher level. If you are interested in rooting, and flashing custom ROMs on your device, definitely download all of these. You can start with getting the Flashing Tool, then Mi Unlock, as well as the ADB Driver and platform tools. I also want to mention that you can use these with other models of Xiaomi devices.

The post [Download] Drivers & Tools for Redmi 4X / Prime appeared first on Xiaomi Firmware.

Download PC Drivers for Xiaomi Mi Mix and Mi5 phone

Xiaomi USB Drivers: xiaomi_usb_driver.rar – 8 MB

ADB Tools: adb.zip – 991 KB

ADB Setup: adb-setup-1.4.3.exe – 9 MB

Qualcomm Driver: Qualcomm+Drivers.zip – 10 MB

QDLoader HS USB Driver: QDLoader+HS-USB+Driver.zip – 17 MB

Tools and Utilities

XiaoMiFlash: XiaoMiFlash.zip – 30 MB

MiPhone Manager: The Official Download Link

Android SDK Platform Tools: Android+SDK+Platform+Tools.rar – 1 MB

QPST – Qualcomm: QPST.2.7.378.rar

Flasher Toolkit: FLASHER TOOLKIT Mi5v3.zip

Mi Unlock Tool: miflash_unlock-en-2.2.624.14.zip

The post [Download] Drivers and Tools for Xiaomi Mi Mix appeared first on Xiaomi Firmware.

How to get rid of Kedacom USB Device Driver

1. Start your Windows 10 PC in test mode. Disconnect from the internet. Open “Device manager”.
2. Boot your device in fastboot mode.
3. In device manager, try deleting Kedacom USB Devices > Android Boodloader Interface.
4. Delete Kedacom USB Devices until you’ll see “Other devices” > “Android”. If your device isn’t found anyhow, try reconnect it via USB cable.
5. Now when you see “Android” device with question mark, update with xiaomi_usb_driver folder, you’ve downloaded previously. Download here: xiaomi_usb_driver.rar (don’t forget to unpack this archive).
6. If you’re not fast enough to update the driver, reboot your device in fastboot mode again and try updating the drivers more quickly.
7. In the end you should see “Android Phone > Android ADB Interface” in device manager.
8. Now you can flash your device. Do not connect to the network or exit the test mode, otherwise Kedacom driver will be installed once again. On some systems the “Android Phone > Android ADB Interface” can be saved.

If any of you, guys, have some ideas about how to fix this issue, please share your thoughts in the comments!

The post How to delete Kedacom USB Device Driver from PC appeared first on Xiaomi Firmware.

[Guide] How to install drivers for Xiaomi Mi6

To install Xiaomi Mi6 drivers and utilities, you’ll need to turn off drivers digital signature verification. It’s done by entering Test mode on Windows 7, 8 and Windows 10.

To enable Test mode on your PC, start “Command prompt” as administrator.

1. Start > Find “Command prompt” and right click > Select “Start as administrator” or right click on “Start” menu button and select “Command prompt (Admin)”.
2. In the command prompt type this command to enable “Test mode”:

   bcdedit.exe -set TESTSIGNING ON

3. Press “Enter” and reboot your PC.
4. If everything was done correctly, after reboot, you should see “Test mode enabled” message in the right corner of the screen.
5. Now install all required drivers for Xiaomi Mi6 (find download links below).
6. Now we will disable the test mode by typing this command in the “Command prompt”:

   bcdedit.exe -set TESTSIGNING OFF

7. Reboot your PC again.

Download drivers for Xiaomi Mi6

XiaoMiFlash for Mi6: XiaoMiFlash.zip (29.5 Mb)

Qualcomm Driver for Mi6: Qualcomm+Drivers.zip (9.5 Mb)

QDLoader+HS-USB+Driver for Xiaomi Mi6: QDLoader+HS-USB+Driver_32-64bit_Setup (1).7z (14.7 Mb)

adb-setup: adb-setup-1.4.3.exe (9.2 Mb)

Mi PC Suite (03.07.2015 release): MiSetup2.2.0.7032_2717.exe (37.4 Mb)

Mi Unlock Tool 2.2.624.14: miflash_unlock-en-2.2.624.14.zip (26 Mb)

The post Download and install drivers for Xiaomi Mi6 appeared first on Xiaomi Firmware.

Install Qualcomm QDLoader USB and MediaTek Drivers for Xiaomi

Generally speaking, you must have MiFlash installed before doing any manipulations with your Xiaomi device. It is used for flashing ROM on Xiaomi smartphones. MiFlash tool also comes very handy when you need to restore hardbrick, softbrick or bootloop device. Before installing MiFlash tool you need to disable driver signature enforcement on Windows PC. Check out this guide for more information.

How to install MiFlash on PC

Download and unpack MiFlash archive on your PC (check out this post for the MiFlash latest version). Now restart your PC and disable driver signature enforcement. After restarting the computer, start the MiPhone.exe from unpacked archive. Select installation path and click “Next”. During the installation you must confirm security system messages by selecting “Install this driver anyway”. When installation is completed, you’ll see short instruction about how to configure your device to access the internal memory. Read the instructions and press “End” button.

Now you’ve got MiFlash tool installed, as well as some default drivers. You can already start using MiFlash, but it’s recommended to install additional drivers for your device. Let’s continue.

Download and install Qualcomm QDLoader USB Drivers for Xiaomi device

Download and unpack the archive with Qualcomm QDLoader USB Drivers for Xiaomi smartphones. After unpacking the downloaded archive with Qualcomm USB drivers, run the .exe installer for your system. On the first screen select the suitable network driver (usually it is WWAN-DHCP) and click “Next”.

Read and confirm the license agreement and click “Next” again to continue. Click “Install” to install Qualcomm QDLoader drivers on your PC. Installation process should start. In order for the installed drivers to take effect and start working, you must restart your PC.

Download: QDLoader+HS-USB+Driver_32-64bit_Setup.7z (14.7 MB)

Download and install MediaTek Drivers for Xiaomi device

Before installing MediaTek drivers you must first disable digital signature verification on your PC. Find tutorial here.

Download and unpack MediaTek drivers on your PC. After you’ve unpacked the downloaded archive find android_winusb.inf, right mouse click on this file and select “Install”. Confirm installation by selecting “Install this driver anyway”. Restart your PC after installation is completed.

Download: MTK_Android_USB_Driver.zip (8.3 MB)

The post Qualcomm and MediaTek Drivers for Xiaomi Phones appeared first on Xiaomi Firmware.

Download Xiaomi Redmi Note 4X Drivers and Software

Updated 21.09.2017

MIUI ROM Flashing Tool for Redmi Note 4X

Description: Software for installing MIUI Fastboot ROM on Xiaomi Redmi Note 4X phone.

Read more on how to flash Xiaomi Redmi Note 4X with Fastboot mode here – Continue reading…

How to install MIUI ROM Flashing Tool

MIUI ROM Flashing Tool for Redmi Note 4X (MiFlash) 2016.08.30.0

MiFlash20160830.msi (31.0 MB): Download Here

MiFlashSetup_eng.msi (48.0 MB): Download Here

Mi Unlock for Redmi Note 4X

Description: Below you’ll find download link for English version of Mi Unlock application. Mi Unlock is used for unlocking bootloader on your phone.

Mi Unlock 1.1.1111.11231

miflash_unlock-1.1.1111.11231.zip (18.7 MB): Download Here

Mi Unlock 2.2.624.14: Download Here

Mi Unlock 2.3.724.7: Download Here

Mi Unlock 2.3.803.10: Download Here

QDLoader HS-USB Driver for Redmi Note 4X

Description: QDLoader HS-USB Driver is a required PC driver for Xiaomi Qualcomm Android phones. In case you need to unbrick your Xiaomi Redmi Note 4X device this driver is essential.

QDLoader HS-USB Driver (32/64-bit)

QDLoader+HS-USB+Driver.zip (17.0 MB): Download Here

ADB Driver Lite (32/64-bit) for Redmi Note 4X

Description: ADB Driver is required for executing commands and modifying Redmi Note 4X using “Command Prompt” on your Windows PC.

ADB Driver Lite (32/64-bit)

ADB+driver+v1.17+lite.zip (9.0 MB): Download Here

Xiaomi PC Suite for Redmi Note 4X

Description: Latest version of the official MIUI device PC software. With this software you can backup, restore, upgrade or flash ROM on your Mi device.

Xiaomi PC Suite 2.2.0.7032 (32/64-bit)

MiSetup2.2.0.7032_2717.exe (37.4 MB): Download Here

Platform-tools (adb/fastboot) for Redmi Note 4X

Description: These tools are required in case you want to unlock bootloader on your Redmi Note 4X device and flash or update a new ROM image.

Platform-tools (adb/fastboot) r.25.0.3

tools_r25.0.3-windows.zip (1001 KB): Download Here

Platform-tools (adb/fastboot) r.26.0.2

tools_r26.0.2-windows.zip: Download Here

tools_r26.0.2-linux.zip: Download Here

tools_r26.0.2-macosx.zip: Download Here

Minimal ADB and Fastboot for Redmi Note 4X

Description: This is one of the most essential tool for working with Redmi Note 4X android phone. It helps you to modify, replace, update and tweak system files with ease. This tools also help to unlock bootloader on your phone.

Minimal ADB and Fastboot 1.4.1

minimal_adb_fast__v1.4.1_setup.exe (930 KB): Download Here

15 seconds ADB Installer for Redmi Note 4X

Description: As far we understand this is another installer for ADB and fastboot drivers. This is essiantial tool for debugging, making backups and changing system partition. This is most easiest and fastest ways to install ADB drivers on your Windows PC. This tool automatically installs ADB, fastboot and all other required drivers.

15 seconds ADB Installer 1.4.3

adb-setup-1.4.3.exe (9.2 MB): Download Here

HashTab

Description: Software for checking MD5 hash after downloading ROM.

HashTab_v6.0.0.28_Setup.exe (1.1 MB): Download Here

USBDeview

Description: Software for checking and deleting unnecessary USB drivers.

usbdeview-x64.zip (111 KB): Download Here

The post [Download] Drivers & Utilities for Redmi Note 4X appeared first on Xiaomi Firmware.

Download Drivers for Redmi Note 4

Primary Redmi Note 4 Drivers and Apps

MiFlash (same as miPhone)

Official flasher for all Xiaomi smartphones. Works on Windows 7, 8 & 10. Sometimes requires unlocked bootloader. Includes all required drivers for USB and ADB. Stuff like: Google ADB tool, Microsoft MTP, RNDIS driver, Qualcomm USB serial driver.

• Download: MiFlash20160830.msi
• Previous version: MiSetup2.2.0.7032_2717.exe

MiFlash Unlock

Software used to unlock the bootloader on Xiaomi smartphones.

• miflash_unlock-1.1.1111.11231.zip
• MiFlashUnlock_1.1.0317.1_en.zip
• miflash_unlock-en-2.2.624.14.zip

SP Flash Tool

Flash tool for flashing offical ROMs. Also using for unbricking your devices. Read more about SP Flash Tool.

• SP_Flash_Tool_v5.1620: SP_Flash_Tool_v5.1620_Win.zip
• SP_Flash_Tool_v5.1640: SP_Flash_Tool_exe_Windows_v5.1640.00.000.zip

USB Drivers for Windows

These drivers also required for SP Flash Tool to work. In case you’ve installed MiFlash you don’t need these drivers.

• Download: latest_usb_driver_windows.zip

Additional Redmi Note 4 Drivers and Utilities

Mi PC Suite

Official software for your PC: driver installation, flashing, backup. Doesn’t work with Android 6 at the moment. Includes all required drivers for Xiaomi smartphones.

• Mi PC Suite: MiSetup2.2.0.7032_2717.exe

USBDeview

Software used to identify and remove currently installed  USB drivers on your computer. Check out full post.

• Download: usbdeview.zip

ADB (Android Debug Bridge)

Console PC software for debugging Android devices.

• ADB Installer v1.4.3: adb-setup-1.4.3.zip

File unsigner

Software for removing driver digital signature.

• Download: FileUnsigner.exe

MauiMETA

IMEI restoration and model tools. Check out full post.

• Download: MauiMETA_v9.1635.23.rar

Mobileuncle MTK Tools & ToolHero

Custom recovery flashing, IMEI & other tools.

• Toolhero 2.0.16: toolhero_216.apk

The post [Download] Xiaomi Redmi Note 4 Drivers & Utilites appeared first on Xiaomi Firmware.